If you choose home improvement company brush coating, be sure to watch out for this phenomenon: the decoration company subcontracts, and finally to the small construction team, to save money by multi-water. If the construction team fails to use the standard watering capacity and the water volume is too large, for example, a room with 5 barrels of latex paint should be used, and two barrels of paint should be used. It should be brushed 3 times and the result should be brushed only twice. This can have consequences. If you think about it, it will make the coating's resistance to scrubbing, mold, and alkalinity fall, showing off powder, a slight scrub with a damp cloth to expose the substrate, a glossy high-grade paint that does not have luster, and a rough surface.
At present, the main factors affecting the quality of coating construction in the home improvement market are the following:
Substrate processing
In addition to the selection of qualified putty powder, adhesives, wall linings and other materials, the material of the wall substrate, the flatness of the treatment, the cleanliness (including the removal of the old wall surface of the old coating, mildew, dust, oil, etc.) and the wall Surface humidity, acidity, etc. will affect the final coating effect.
Primer selection and use
Brushing primer can not only prevent the appearance of efflorescence, discoloration, mildew and other problems on the surface of the wall, but also increase the adhesion of the wall and the topcoat, so that the topcoat film is more even and solid, so the primer is a new home An essential part of the painting process. The primer should be compatible with the topcoat, but some decorators who decorate the guerrillas or who are unscrupulously operated often use inferior primers or even no primer at all, resulting in large paint consumption, discoloration, shedding, and lumping. Mildew and other brushing problems.
Construction operation
Whether the dilution ratio of the paint is proper before construction, whether it is well-mixed, and whether the operator's skill in construction is skillful is critical. Excessive dilution will cause the paint not to cover the bottom and pulverize. The shiny paint will suffer from defects such as loss of light and color. In order to grab the construction period or save costs, construction that is not in accordance with the specifications is one of the main reasons why coating quality cannot be guaranteed.
Construction environment
Attention should be paid to the climatic conditions during construction and the conditions of the construction site, such as temperature, humidity, whether it is windy or rainy, indoor ventilation conditions, and whether the brushing surface and brushing tools are clean. During construction, after a paint is completely dry (about 7 days in summer, about 15 days in winter, and properly extended in wet weather and poor ventilation), another paint is applied and each paint is applied and dried. Should open the doors and windows, keep ventilation, otherwise it is easy to cause the film from the drum, powdered.
Features
At present, there are many interior wall paint brands and varieties on the market. They do not understand the construction characteristics of the products and do not strictly follow the construction instructions for the products. The construction quality problems caused are also problems that cannot be ignored. If excessive dilution results in sagging and hair growth, serious brush marks, roller marks, etc. may be caused due to improper construction process selection.
Three trees paint entrance decoration paint coating home interior decoration company
Materials and Composition
Aluminium Oxide Abrasive Belt is known for its excellent hardness and durability. Because it is made of high-quality aluminum oxide, it has extremely high wear resistance and corrosion resistance, ensuring excellent performance in various harsh grinding environments.
Production Process
The manufacturing process of Aluminium Oxide Abrasive Belt is to use electrostatic sandblasting technology to evenly adhere high-quality aluminum oxide particles to substrates of different materials. The substrate usually has a cloth base or a paper base to meet different needs. During the production process, each process is subject to strict quality control, from the selection of raw materials to the inspection of finished products, to ensure that each belt meets high standards. At the same time, we have also obtained IS09001 certification to ensure that each belt meets international production standards.
Performance and Advantages
This belt is known for its excellent durability and efficient grinding performance. It can maintain a stable grinding effect for a long time without sand loss or uneven wear. Using Aluminum Oxide Abrasive Belt can not only significantly reduce working time, but also improve work quality. While ensuring the grinding effect, it can also save production time and money costs.
Application Fields
Aluminum Oxide Abrasive Belt is widely used in many industries. In furniture manufacturing, it is used to grind and polish wood surfaces. In the field of automobile manufacturing and maintenance, abrasive belts can be used to grind car bodies or polish paint surfaces. The stainless steel processing industry also benefits from this abrasive belt, which can provide high-quality grinding and polishing for stainless steel surfaces.
Product Specifications
We offer a variety of specifications of Aluminum Oxide Abrasive Belt, including different lengths, widths and grit options to meet various grinding needs. The size of paper-based abrasive belts is usually 4*36 inches, 4*24 inches, 3*21 inches, and the size of cloth-based abrasive belts is usually 1350*1900mm, 1330*2200mm, 1350*2620mm. In addition, customers can also customize the size and grit of the abrasive belt according to specific needs to ensure the best application effect.
Use and Maintenance
We recommend that users install the sanding belt in the direction indicated by the arrow on the back of the belt and regularly check the status of the sanding belt interface. In order to extend the service life of the sanding belt, it is recommended to perform proper cleaning and maintenance after use and replace it in time if necessary.
Aluminium Oxide Abrasive Belt,Metal Polishing Coated Abrasive Belt,4X24Inch Sanding Belt,Coated Abrasive Belt
Foshan Nate Abrasive Science & Technology Co.,Ltd , https://www.nateabrasives.com