The outer casing of the electric agricultural machine is made of metal, and special care must be taken during installation to avoid personal electric shock. Pay attention to the following eight aspects when using an electric farm machine:
1. Electric agricultural machinery installation must have reliable grounding device or temporary grounding device.
2. When moving electric agricultural machinery, the power must be turned off beforehand, and it must not be moved.
3. The power supply line of electric agricultural machinery must be installed in accordance with the rules of electricity consumption. If the agricultural implement is far away from the power supply, a double-pole switch and a capacitor breaker should be installed separately near the agricultural implement to quickly cut off the power in the event of an accident.
4. If the electric agricultural machinery fails, it needs to be powered off and repaired, and it cannot be charged. At the same time, it is necessary to hang warning signs such as "no closing" or "someone working", or send a special guard to prevent someone from mistakenly closing the knives.
5, the use of single-phase motor agricultural machinery, to install low-voltage electric shock security, and often remain sensitive and reliable. In this way, the power can be automatically cut off in the event of an accident, so that the electric shocker is out of danger.
6. Agricultural machinery that has not been used or damp for a long time should be tested before being put into normal operation. If it does not work after power-on, it must be immediately powered off to prevent the burning of agricultural machinery and endanger personal safety.
7. Agricultural machinery operators must strengthen their awareness of safety and strictly enforce operational procedures. In operation, wear insulated shoes, do not rub the electrical equipment with your hands and a damp cloth, and do not hang clothes on the wires.
8. In the event of an electrical fire, immediately pull the brakes. Do not use water-spraying methods before the power failure to prevent power transmission or leakage. If someone gets an electric shock, cut off the power immediately and save the person. If the guillotine is far away from the electric shock, use an insulator such as a wooden rod to pick up the electric wire. Do not pull the electric shock by hand. Otherwise, the dragger will also get an electric shock.
Concerned about surprises
Label: Instructions for use of electric agricultural machinery
Previous: How to extend the service life of wear parts of crushed stone machinery Next: Practical analysis of anti-static floor
Connecting rod bearings provide rotating motion of the crank pin within the connecting rod. The most common symptoms of a connecting rod bearing failure is a broken connecting rod piercing the crankcase; a problem that can be caused by bad rod bearings. A failed rod bearing will end up producing a metallic knocking or rumbling noise from the engine, especially during cold starts. Check our Online Automotive Spare Parts store for wide range of Connecting rod bearings for all car models. Our fast selling Connecting Rod Bearing includes Mahindra Scorpio Connecting Rod Bearing, Toyota Innova Connecting Rod Bearing, Volkswagen Polo/ Vento Connecting Rod Bearing, Tata Indica Connecting Rod Bearing and many more. In case of any query do get in touch with us.
Engines Connecting Rod Bearing,Connecting Rod Bearing,Con Rod Bearing For Engine,Auto Engine Con Rod Bearing
Shijiazhuang Longshu Mechanical & Electrical Equipment Trading Co., Ltd. , https://www.longsbearings.com