The first part: In the overall design of the renovation, there must be indoor environmental awareness. In determining the home decoration design program, pay attention to three aspects:
1. Reasonably calculate the space load of houses. Due to the fact that various decorative materials on the market will release some harmful gases, even if it meets the national standards for hazardous materials for interior decoration materials, a certain amount of indoor space will also cause harmful substances in indoor air to exceed the standard.
2, with a variety of decorative materials used. In particular, it is best not to use a single material for the ground material, because the ground material is used in a large proportion in the interior decoration materials. If a single material is selected, it will cause some harmful substances in the indoor air to exceed the standard.
3, for the indoor purchase of furniture and other decorative items to stay ahead of the pollution.
The second link: the decoration of the construction process should pay attention to two aspects.
1, floor pavement problems. Pavement lining under solid wood flooring and composite flooring is a traditional construction process. However, due to this process, indoor environmental pollution is very common. The main reason is that large core boards and other wood-based panels underneath the floor all contain Formaldehyde cannot be closed and vented.
2. Problems with wall finishes. According to the requirements of national regulations, in the case of wall finishing projects, primary treatment and brushing of interface agents shall be carried out to prevent wall peeling or cracks. However, some construction workers use brushed varnish to perform the primary treatment, and most of them use low-grade varnish. A large amount of thinner was added during painting, which inadvertently caused serious indoor benzene contamination.
Focus on the selection of three types of materials
There are a wide variety of decoration materials and a wide variety of materials. Everyone must choose according to national standards. At the same time, attention should be paid to the following three types of decorative materials:
Stone tiles. This kind of material should pay attention to radioactive pollution, especially some natural stone such as granite, radioactive material content is relatively high, should be strictly in accordance with national standards for selection, if the dealer does not have a test report or consumers themselves do not trust, you can take a sample to Indoor environmental testing units conduct radiological tests.
Plastic paints, such as furniture lacquer, wall lacquer, and various adhesives used in decoration, are the main sources of benzene contamination in indoor air. There are many problems in the market, and consumers are advised to set up factories. Shop to buy, or choose benzene-free water-based materials.
Artificial board types, such as various laminate flooring, large core boards, plywood, and density boards. This is the main source of indoor formaldehyde pollution. It is best to use formaldehyde-eliminating agents before the decoration to eliminate harmful substances from the plates.
Decoration Materials Knowledge Renovation Material List Bay Window Decoration Interior Decoration Decorative Paint Formaldehyde Space Floor Tile Tile Rubber Floor Tile
Turbine Flowmeter,Turbine Flow Meter,Turbine Type Flow Meter,Turbine Water Flow Meter
Jiangsu Baichuang Instrument Group Co.,Ltd , https://www.subcip.com