Fire Equipment Fire Protection Explosion Proof Measures and Knowledge

In order to prevent combustibles and air or other oxidants from acting in a dangerous state, they are in the process of production. First of all, the management and control of combustibles should be strengthened. Combustible materials should be replaced by non-combustible or flame-retardant materials, which should not cause leakage or accumulation of combustible materials to form explosive mixtures. Secondly, combustible materials that prevent air and other oxidizing substances from entering the equipment or preventing leakage. Mix with air.

To prevent fire and explosion disasters, controlling the ignition source is one of the important measures. The main sources of fire or explosion accidents are open flames, hot surfaces, friction and impact, adiabatic compression, chemical reaction heat, electrical sparks, static sparks, lightning strikes, and photothermal rays. In production sites where there is a risk of fire or explosion, adequate attention should be paid to these sources of ignition and strict control measures should be taken.

There are many factors that cause fires and explosions. Once an accident occurs, the consequences are extremely serious. In order to ensure safe production, prevention work must first be done to eliminate the risk factors that may cause combustion explosions. In theory, if the combustible material is not in a dangerous state or all fire sources are eliminated, these two measures can prevent fires and explosions if they are controlled. However, in practice, due to the limitation of production conditions or the influence of certain uncontrollable factors, it is not enough to adopt only one measure. It is often necessary to adopt various measures to increase the safety of the production process. In addition, other auxiliary measures should be fully considered so that in the event of a fire or explosion, the degree of harm reduction can be minimized and the loss can be minimized. These are the issues that must be fully considered in the fire protection and explosion protection work. This article was published by China Rescue Equipment Network, which provides fire fighting equipment.