Bearing temperature viewing method analysis

Source: China Bearing Network Time: 2018-03-07

/*250*250 was created on 2017/12/25*/ var cpro_id = 'u3171089';

The temperature of the bearing gradually rises with the start of the bearing; the stability reaches the steady state after 1-2 hours. The normal temperature of the bearing is different due to the heat capacity of the machine; the heat dissipation; the speed and load are different. If it is smooth, the device is suitable; Rise; abnormal high temperatures will occur; it is necessary to suspend work; take necessary precautions.
The high temperature often indicates that the bearing is in an abnormal condition. The high temperature is also harmful to the smoothing agent of the bearing. Sometimes the bearing overheating can be attributed to the smoothing agent of the bearing. If the bearing rotates for a long time beyond 125 Â°C, the bearing life will decrease. The reasons for high temperature bearings include: smooth lack or over-smooth; smoothing agent. Contains impurities; excessive load; bearing loss ring; lack of clearance; and high friction of oil seal attack.
The thermal sensor can be used to monitor the working temperature of the bearing at any time; and when the temperature exceeds the specified value, the alarm is automatically activated or suspended to avoid the ignition of the shaft.
Therefore, it is necessary to continuously monitor the bearing temperature; whether it is measuring the bearing itself or other important parts. If it is in the same working conditions; any temperature change can indicate that the problem has occurred.
The timing measurement of the bearing temperature can be measured by means of a thermometer; for example, skf digital thermometer; the bearing temperature can be accurately measured and displayed according to Â°C or Fahrenheit temperature.
Importance of the bearing; meaning that when it is damaged; it will form a stop of the equipment; therefore, the most suitable type of such a bearing should be equipped with a temperature detector.

Recommend to friends comments close window

Bearing related knowledge

Analysis of the method for improving the qualification rate of short cylindrical roller bearings: device method and precautions for bearing housings. Causes of failure of sliding bearings. Analysis of the layout of high-rigidity bearings by tumbling FAG bearing layout

This article links to http://
Please indicate the bearing network http://

Previous:Mud pump crankshaft connecting rod bearing depiction and equipment Next:Automobile parts life test: bearing test

Pipette Pump

Pipette Pump Breast Pump,Pipette Pump Bulb,Pipette Pump Electrical

Topscien Instrument(Ningbo China)Co.,LTD , https://www.centrifugesupply.com