ã€China Aluminum Network】 High-frequency welding aluminum partitions are two or more pieces of glass supported by aluminum bars, evenly spaced and sealed around the perimeter, so that there is a dry gas space between glass layers of glass products. The high-frequency welding aluminum partition is a new type of building material that is heat-insulating, sound-insulating, aesthetically applicable, and can reduce the weight of the building. Here's a brief introduction to the use of high-frequency welding aluminum spacers.
The routine inspection of high-frequency welding aluminum spacers refers to the measurement and verification of the operation status, technical status, working accuracy, and parts wear degree of insulating glass equipment. By inspection, hidden dangers can be discovered in a timely manner and targeted measures can be taken. , Eliminate failures. According to the inspection situation, formulate a patchwork plan, and make preparations for patching before the destination, which can improve the quality of patchwork and shorten patch time. In the process of producing insulating glass equipment, a series of problems often arise. Because the staff do not know how to deal with it, the breakdown is even worse. In this case, it is necessary to train the staff before the machine and it can timely respond to the problems of the production of insulating glass equipment in the production process. They need to understand:
When it comes to high-frequency welding aluminum extrusions extruded butyl rubber, there are burrs, not smooth. Coping methods: First of all Xiaochang Chang machine processing methods are different, for the new machine, you should first observe the rubber hole is smooth, If the rubber hole is rough, it should be polished, and then try the machine; the old machine, because the device's temperature sensor accidentally insensitive, the performance of the temperature does not meet the reality, then it is necessary to increase the temperature until the glue is normal. When butyl rubber does not adhere to aluminum strips and glass, it is due to the influence of temperature. It is recommended that the temperature be adjusted up to the appropriate point.
High-frequency welding aluminum spacer is a common anti-rust reinforcement equipment. Because of this, through the special skills of workmanship, high-frequency welding aluminum spacers can adhere to their own nature and conditions for a long time. However, unlike the use of the environment, this type of reinforcement requires a relatively high life expectancy and the same requirements for the corresponding skills and means as a guarantee. Generally speaking, hollow aluminum strips can be customized according to customer needs, make a variety of specifications, perhaps to re-create a model. In order to make it possible to have a long service life, maintenance and disposal will be performed for different types of products. The main thing is to maintain the film on the outside of the product. The first is usually oxidation, usually oxidation + sandblasting, hardening treatment, hardening treatment + sandblasting. Its intention to maintain the appearance of the primary plated film is to add to the appearance of hardness, by using, high temperature, anti-static many features, such as the appearance of burr-free lubrication, produced work of great assistance to facilitate the use of it sensitive, with the degree of priority. The more common exterior plating colors are silver, silver white, silver, gray, dark gray, black, etc., and may be plated with various colors according to customer's requirements.
Silicone Lamp,Kids Night Light,Colorful Silicone Lamp,Rechargeable Silicone Lamp
Yuyao Flylit Appliance Co.,Ltd , https://www.flylitlight.com