The scrubbing machine is also called scrubbing dryer. Now it is mainly used for factory floor warehouses, high-speed rail station waiting rooms, real estate underground parking, school restaurants, hospital outpatient wards, bank hotel lobby and other places with hard ground, with convenient and quick , saving manpower features.
The normal use of scrubbers can be combined with neutral detergents and defoamers. The effect of decontamination is better and the floor is smoother. With the strict investigation of environmental protection in the country, the requirements for industries such as factories, hotels and real estate are further enhanced, and environmental requirements are high. The artificial effect is poor. The scrubbing machine becomes a must for contemporary cleaning work. The price is low and manpower is saved. A machine can withstand 7-8 cleaners, and the cost can be recovered in one year or even several months. The cleaning machines provided by the cleaning equipment range from small hand-push type scrubbers to large-scale driving type scrubbers. If you have any questions, you can contact customer service customer service engineers will give you a detailed answer!
First, when the washing machine work too much foam?
Check whether a low-foam formula cleaner is used. If necessary, add an appropriate amount of defoamer to the recovery tank.
Please note: When cleaning dirt floors with stubborn dirt, it will produce more foam. Please dilute the detergent according to the guidelines.
Second, the washing machine water absorption is not good how to do?

1. Check whether the surface of the squeegee blade is clean and whether solid waste remains inside the tape.
2. Replace the worn rubber strip. Adjust the working angle and pressure of the squeegee. The working angle and pressure of the squeegee should be adjusted for the wear condition of the squeegee; in normal working conditions, the rear squeegee should be aligned with the front squeegee squeegee.
3. Check whether the suction pipe is properly connected with the recovery tank.
4, check and clean the suction system.
5. Check if the suction motor switch is turned on.
Third, the type of floor washing machine applicable?

The scrubber is a truly practical, multi-functional device. The scrubber is suitable for working on all types of surfaces, including indoor and outdoor. For example:
- Tile surface
- Marble
- Concrete
- Paint floor
- Epoxy floor
- Rubber floor
- What surface dirt can be removed by the scrubber from the terrazzo floor?
The washing machine is suitable for daily use, and purchasing a professional floor washing machine can effectively reduce the frequency of cleaning.
For some stubborn and severe dirt (such as processing waste, sludge, oil, tire tracks, solid waste, etc.), it is recommended to use special accessories for cleaning: for example, pad, oil cleaner, etc. or special squeegee blade, etc. Wait.
Fifth, how to maintain the washing machine battery?

This is a big problem. Long-term good maintenance will increase the service life of the machine. Under normal circumstances, the battery will not be used for about 2 years. Conversely, the battery life will be greatly reduced, and the battery will have to be replaced in a short time. . How to maintain the washing machine battery?
1. The discharged battery should be charged within 24 hours, otherwise it will damage the battery.
2. When the scrubber battery is in charge state, please make sure that the socket power supply is in good contact, and the charger plug is in good contact with the battery plug.
3. When the battery of the scrubber is used for the first time, the first three charging times should be more than 12 hours, and then it can be full. The charging time is normally about 8 hours. If you use a large current to charge the battery, the charging time may be shorter, but the larger current will also damage the battery life.
4. After the battery is fully charged, the charger will automatically stop charging the battery.
5, when the washing machine battery is not used for a long time, please charge the battery once every three months.
6. If there is any oxide on the battery column and wire connector of the scrubber, it shall be removed in time.
Six, washing machine brush water shortage?

1. Check whether the drain valve is open.
2, check the water tank is enough water.
3, check the filter is blocked.
4, check the water supply pipe is blocked.
Seven, washing machine cleaning effect is not good how is it?
Check the brush for wear (when the bristles are shorter than 15mm, replace it), be sure to replace with a brush of the same size. When cleaning stubborn dirt, special brushes are recommended.
The scrubbers provided by Runjie Cleaning Equipment range from small hand-push scrubbers to large-scale scrubbers. If you have any questions you can contact customer service or 18068111395
The normal use of scrubbers can be combined with neutral detergents and defoamers. The effect of decontamination is better and the floor is smoother. With the strict investigation of environmental protection in the country, the requirements for industries such as factories, hotels and real estate are further enhanced, and environmental requirements are high. The artificial effect is poor. The scrubbing machine becomes a must for contemporary cleaning work. The price is low and manpower is saved. A machine can withstand 7-8 cleaners, and the cost can be recovered in one year or even several months. The cleaning machines provided by the cleaning equipment range from small hand-push type scrubbers to large-scale driving type scrubbers. If you have any questions, you can contact customer service customer service engineers will give you a detailed answer!
First, when the washing machine work too much foam?
Check whether a low-foam formula cleaner is used. If necessary, add an appropriate amount of defoamer to the recovery tank.
Please note: When cleaning dirt floors with stubborn dirt, it will produce more foam. Please dilute the detergent according to the guidelines.
Second, the washing machine water absorption is not good how to do?

1. Check whether the surface of the squeegee blade is clean and whether solid waste remains inside the tape.
2. Replace the worn rubber strip. Adjust the working angle and pressure of the squeegee. The working angle and pressure of the squeegee should be adjusted for the wear condition of the squeegee; in normal working conditions, the rear squeegee should be aligned with the front squeegee squeegee.
3. Check whether the suction pipe is properly connected with the recovery tank.
4, check and clean the suction system.
5. Check if the suction motor switch is turned on.
Third, the type of floor washing machine applicable?

The scrubber is a truly practical, multi-functional device. The scrubber is suitable for working on all types of surfaces, including indoor and outdoor. For example:
- Tile surface
- Marble
- Concrete
- Paint floor
- Epoxy floor
- Rubber floor
- What surface dirt can be removed by the scrubber from the terrazzo floor?
The washing machine is suitable for daily use, and purchasing a professional floor washing machine can effectively reduce the frequency of cleaning.
For some stubborn and severe dirt (such as processing waste, sludge, oil, tire tracks, solid waste, etc.), it is recommended to use special accessories for cleaning: for example, pad, oil cleaner, etc. or special squeegee blade, etc. Wait.
Fifth, how to maintain the washing machine battery?

This is a big problem. Long-term good maintenance will increase the service life of the machine. Under normal circumstances, the battery will not be used for about 2 years. Conversely, the battery life will be greatly reduced, and the battery will have to be replaced in a short time. . How to maintain the washing machine battery?
1. The discharged battery should be charged within 24 hours, otherwise it will damage the battery.
2. When the scrubber battery is in charge state, please make sure that the socket power supply is in good contact, and the charger plug is in good contact with the battery plug.
3. When the battery of the scrubber is used for the first time, the first three charging times should be more than 12 hours, and then it can be full. The charging time is normally about 8 hours. If you use a large current to charge the battery, the charging time may be shorter, but the larger current will also damage the battery life.
4. After the battery is fully charged, the charger will automatically stop charging the battery.
5, when the washing machine battery is not used for a long time, please charge the battery once every three months.
6. If there is any oxide on the battery column and wire connector of the scrubber, it shall be removed in time.
Six, washing machine brush water shortage?

1. Check whether the drain valve is open.
2, check the water tank is enough water.
3, check the filter is blocked.
4, check the water supply pipe is blocked.
Seven, washing machine cleaning effect is not good how is it?
Check the brush for wear (when the bristles are shorter than 15mm, replace it), be sure to replace with a brush of the same size. When cleaning stubborn dirt, special brushes are recommended.
The scrubbers provided by Runjie Cleaning Equipment range from small hand-push scrubbers to large-scale scrubbers. If you have any questions you can contact customer service or 18068111395
The entire Bolt is threaded, and this type of bolt has higher strength and wider range of use than hexagonal and double headed bolts. Hexagonal and double headed bolts are commodity grade bolts, expressed in performance grade. The fully threaded bolt is a specialized grade bolt, which is represented by the material grade. The material substitution for chemical equipment must be confirmed by the design before it can be represented. Once, it was seen on site that a 4.5 grade hexagonal bolt was used to replace a 8.8 grade bolt. This grade 4.5 bolt is not used in chemical engineering.
Allthread Stud,B7 Full Thread Stud Blue,Full Thread Coating Stud Bolt,A320 Full Thread Stud with Nut
AM FASTENER , https://www.asmefastener.com