Nowadays, many people with high ceilings in their homes will choose to open a loft in the upper floor to increase the applicability. Since the attic is so popular, how many people know about the installation of the attic lift? Today, the good story of the attic lift will tell you about the installation of the attic lift, so that you can safely install the attic lift . Going on.
When installing the attic lift, the hole is preferably kept more than 3 cm from the wall. If it is close to the wall, it can be directly fixed by bolts (the accessories are fully distributed), and the maximum load of the stairs is 600 kg. When installing the attic lift, the thickness of the floor slab should be greater than 120mm. Use the four-corner screw stair bracket to hang with the pressure plate. After the screw is tightened on the frame mounting hole, cut off the excess head, cover the decorative plate, and check whether the various parts of the telescopic staircase are It is loose and normal before it can be used. If it is less than 120mm, the board should be placed under the pressure plate.
If the floor is particularly thick, if the conditions permit, the following method can be used: the length of the floor opening is 200mm longer than the length of the stairway, and the extension is closed below, and the first step is made in the middle of the floor; the floor opening is designed near the corner. The edge of the reserved hole should be at least 30mm away from the wall to prevent the impact of the attic lift bracket from flanging and affecting the installation.
Attic lift installation notes:
(1) The civil structure and layout of the interior of the engine room and the hoistway must meet the requirements of the civil construction plan of the attic elevator.
(2) The main power switch must meet the following requirements:
a. The main power switch should be able to cut off the maximum current in the normal use of the attic lift.
b. The attic lift switch should be easily accessible from the entrance of the machine room.
(3) Provide the access and handling space required for the equipment to enter the site according to the requirements of the attic elevator contractor.
(4) Since the installation of the attic lift is a kind of aerial work, in order to facilitate the installation work of the installer in the hoistway, the general contractor should cooperate with the installation of the attic lift to build scaffolding in the appropriate part.
(5) Each floor should have a horizontal reference mark.
(6) Safety protection work for the attic lifts should be done before the attic lifts are installed.
(7) In the installed part of the attic lift, the general contractor shall cooperate with the finished product protection of the attic lift.
When you use it, pull it straight down (the pull rod that is attached to the door pulls the tab on the door panel and rotate it gently to open the door panel, then remove the attic lift to extend it to the ground and stabilize it), and then use it when not in use. You can fix the attic lift on the door panel and then gently push down the door panel. The attic lift will automatically close the lock. It is normal to use the correct method for ten or twenty years.
The above is the precautions for the attic lift that Mr. Jia Jiaju.com introduced to you today. I hope to help everyone. If you want more information, please pay attention to the decoration of the Go Home Network!
POWERFUL COMPACT FLASHLIGHT - The TAC upgraded LED casts a wide beam that effortlessly illuminates a whole room or backyard, yet remains small enough for every day carry (EDC). Conveniently powered for hours with 3 AAA batteries or a single 18650 rechargeable battery. (Batteries not included.)
ONE MODE OPERATION WITH ADJUSTABLE FOCUS - No more cycling through endless modes! With one simple touch, this flash light will deliver a powerful beam where you need it. Use the adjustable zoom to focus in on faraway objects or zoom out to light up a wide area.
ANTISLIP ALL-METAL BODY WITH REMOVABLE CLIP - The knurled design and tough military grade metal body make it a reliable choice for hunting, fishing, hiking, camping, or in tactical situations. The built-in removable clip conveniently attaches to your tool belt or pocket for quick access.
WEATHER & SHOCK RESISTANT - Made for rough handling, this flashlight will endure an earthquake, heavy rain, snow, and other extreme weather. Tough enough to withstand accidental drops and temporary water submersions, you can count on this light during power outages, roadside repairs, and safety emergencies.
EXCEPTIONAL VALUE I INCLUDES 2 FLASHLIGHTS - Keep one in your car, one in your home, or gift one to a friend or family member. Every genuine GearLight comes with a one-year no questions asked replacement warranty and friendly customer service provided by GearLight, a U.S.-based company.
Best Flashlight,Brightest Flashlight,Mini Flashlights,Nebo Flashlight
Ningbo Wason Lighting Technology Co.,Ltd , https://www.nbwasonled.com