The use of formwork support systems has become commonplace in construction, so what should you pay attention to when installing and dismantling? The following is a small series on the construction process of the entire template support system for everyone to explain in detail. First, the preparation work should be in place. The inspection of product quality before installation must be strictly checked. Second, the installation program. Adjust the main keel to the appropriate height, insert the ejector pins on both sides of the main keel and rotate and lock them. Pick up the first main keel and install the auxiliary keel to complete the whole room. Staffing: Considering the ergonomics, the group of four is better, the above two, the following two, cooperate with each other. Finally, the screw is used for leveling, and a comprehensive quality inspection is performed to complete the entire molding process. 2. When the demolishing scheme is demolished, the ejector of the middle part of each main beam is first removed, and then the support is lowered by 5-10mm by adjusting the remaining part of the ejector base screw or hollow screw to remove the sub-beam. And with the falling template, finally remove the main beam and the ejector. Note: When removing the template support, do not use the sledgehammer crowbar to smash and mammoth to avoid damage to the support. After dismantling, it should be piled up in time and placed neatly. Http://news.chinawj.com.cn
Editor: (Hardware Business Network Information Center) http://news.chinawj.com.cn
Digital Charpy Impact Test Machine
Digital Charpy Impact Test Machine,Digital Charpy Impact,Charpy Impact Test Machine,Rubber Impact Testing Machine
Dongguan Best Instrument Technology Co., Ltd , https://www.dgbestinstrument.com