The shower room is a large part of the bathroom space. Whether the bathroom space can be wet or not is determined by the installation technology of the shower room. The following small series will introduce some shower room installation precautions. By the way, what are the shower room accessories? .
When installing the shower room, first prepare the equipment and prepare the necessary tools. After the installation, the installation sequence is to install the bottom basin, install the aluminum, fix the glass, install the top tube, install the rack, install the movable door and close the tail. jobs. After installing the bottom basin, test the water to ensure that the long head of the water is unobstructed; after installing the movable door, install the suction strip or the water retaining strip to do the waterproofing work, and then check whether the utility of each part is comfortable and smooth. After adjusting, tighten the corresponding screws.
The following points should be noted throughout the installation of the shower room:
The first and size pre-buried holes should be designed before the decoration of the bathroom;
Second, the wiring of the leakage protection switch device should be considered before installing the shower room to avoid rework;
Third, the style of the shower room depends on the layout of the bathroom;
Fourth, the shower room must be firmly connected to the building structure;
Fifth, if the water supply system and tiles have been installed before installing the shower room, it is best to customize the shower room.
Introduce the shower room installation precautions, let's take a look at the shower room accessories.
The main accessories we know include main components such as frame, glass, water retaining strip, door stopper, pulley, handle, shower, etc. Other accessories include bathroom clips, solid tops, ground clips, hinges, drawbars, and shafts. Small items such as shower locks, glass clips, plastic parts, etc. When selecting, the main condition is to be firm, and at the same time, it is necessary to take into consideration the requirements of mute, rust prevention, and large force.
Cut-Off Wheels is a simplified product of thousands of impeller, mainly used in industrial production of polishing, is also a kind of industrial consumables products. The impeller matrix has mesh cloth, nylon, plastic, steel paper, etc., the number of pages varies, and is evenly distributed in fan shape. Particle size 36#-400#, 60#, 80# is the most common, the outer diameter of 4"-7" installed in the angular grinder, used for welding seam, positive edge burr grinding and grinding processing, can be interchangeable with the cymbal grinding wheel, has the advantages of good elasticity, high efficiency, good heat loss, low noise can replace the resin cymbal grinding wheel, it has strong elasticity, high tensile and bending strength, Good self-sharpening, high grinding rate, low noise, suitable for grinding the welding seam in the box and the flash edge of the stamping parts. It is mainly used for grinding and polishing of various stainless steel and carbon steel structural parts.
Cut-Off Wheels,Grinding Wheel,Disc For Angle Grinde,Flap Wheel
Behappy Crafts (suzhou)Co.,Ltd , https://www.craftsbehappy.com