Renovation is a big project. Everyone will be more or less DIY to add icing on the cake, which can save some money and increase fun. However, I am afraid that only a handful of DIYs come to my house. In fact, my home DIY began with water and electricity. The reason why I have this kind of courage is that the first time I learned electronics, and the second reason was that the first time I was renovated, the master of hydropower said a word, “PPR pipe is the simplest. People will install it. Fortunately, it costs 1,500 yuan for tools and materials to complete the use of hydropower. The minimum cost for water and electricity for people on the same side of this unit is 4000+, and the most outrageous one is 8000-. When I chat together, I dare not say how much I spent.
A good start drew my head and closed the balcony and the bricklayer. I never asked anyone again. Think carefully, the door and the door cover are custom-made, and the full set of kitchen and toilet is custom-made. Large lockers It is custom-made, ceiling is only part of the corner, in addition to painters, other materials are not arrived at the artificial. When people are invited again, it is as if the supermarket is 1.5 kilometers away from their home.
Click to view details: http://bbs.suzhou.shtuangou.com/dispbbs_0_647240_1.html
Entrance decoration children's room decoration paint kitchen and toilet ceiling storage cabinet
IECEx Approved Coriolis Mass Flow Meter
Zhejiang Sealand Technology Co., Ltd. is a trustworthy manufacturer of Mass Flow Transmitter, Coriolis Mass Flow Transmitter, Coriolis Mass Flow Sensor, Mass Flow Sensor & Mass Flow Sensor Coriolis, ATEX, IECEx & CE approved.
The meter can be connected with computer as follows. Connect the meter and computer with a USB-to-RS485 converter( converter A+ end to transmitter A+ end, B- to B-, and GND to GDN); turn to device manager of the computer to check COM port connected with meter. Start the software, select the right COM port and click Connect; do not change any other parameters (if you do not know the right one, click Automatic options on the left, click Connect, plug & unplug the transmitter, and then check if it is connected). You can click Connect on the tool bar to disconnect or connect again. It will shown Connected/Not Connected at the bottom of this interface.
The flow direction is settable. There are 4 options, forward(default), reverse, absolute value & bi-direction. There is a direction mark on the sensor. Forward means the same direction with the mark on sensor, the meter will only count the flow in this direction; reverse means the opposite direction of the mark, the meter will only count the reverse direction; bidirectional means that the meter will measure both directions, it increases when it is forward and decreases when reverse; absolute means it increases no matter it is forward or reverse.
Mass Flow Transmitter, Coriolis Mass Flow Transmitter, Coriolis Mass Flow Sensor, Mass Flow Sensor, Mass Flow Sensor Coriolis
Zhejiang Sealand Technology Co., Ltd. , https://www.sealandflowmeter.com