1, latex paint wall
The wall scraping putty, yin and yang angle to do straight, the wall to do flat, you can use the ink line up and down the line in the corner, you can find straight; the wall leveling can use 2 meters of aluminum rod card does not exceed 2 mm.
The top corner is not straight, especially when the top surface is not the same color as the wall.
Usually, the top surface of the cast-in-place is very poor, for example, small spaces and upper sides of the window.
The corners are not straight, causing the corners of the windows not to be right-angled. The sunken corner of the ceiling is also very important.
Solution:
The lower corner of the wall should be shoveled to solve the problem.
Before the construction, preliminary inspections should be conducted on the yin and yang angles on the wall surface, where the problem is found, plaster or other methods.
In front of the batch wall, line up all the corners of the wall and use plaster to look straight.
Use a ruler to handle the corner of the wall.
2. How to deal with the yin and yang corners of the wall surface of wallpaper attached to the wallpaper? Is it necessary to press the wood line?
No, usually the construction routine is overlaid on the inside corners and corners on the outside.
3, tile wall surface construction practice in the past is to wear away the tile 45 degrees, and docking, or directly to one of the walls of the tile laps the other wall of the brick, so that the cross-section of the tile is exposed, not too beautiful . At this time, the yin and yang angle was born.
By the way, what is the yin and yang angle, in fact, very good judgment: the wall of the inside corner refers to the recessed corner (also known as the internal angle), such as the angle between the top surface and the surrounding walls. The corner of the wall refers to the protruding corner (also known as the outer corner). Such as the angle between the window opening and the wall
Tile yin and yang
Uses: Used in homes, hotels, hospitals, schools, office buildings, restaurants, shops and other places for tiles, stone horns, wrapped pillars. In the corner of the renovation, close the corner and place the corner line at the junction of the two tiles at right angles.
Material: PVC plus a variety of additives. Color: more than ten kinds of application: suitable for tiles with a thickness of 10mm, such tiles usually have 300×450(mm)
And 300 × 600 (mm) and other specifications.
Features: (1) High strength and good flexibility (2) Smooth surface and pure color.
(3) Hard texture and high corrosion resistance.
Advantages of use: (1) Easy installation, labor saving, time saving and material saving. When using tile or stone without corners and chamfers, the master who will tile and stone can complete the installation with only three nails.
(2) Beautiful and bright. The angular arc surface is smooth and the straight lines are straight, which can effectively ensure that the beveled corners are straight and the corners of the mounting are more three-dimensional.
(3) Rich colors, can be matched with the same color, so that the brick surface, edge consistency, but also with different colors to form a contrast.
(4) It has stable performance and high flexibility. It can be bent at 0-270 degrees, and it can be ideally angled according to design requirements.
(5) Environmental protection performance is good, and various raw materials used in the product have no adverse effects on the human body and the environment.
Decoration construction knowledge tile entrance decoration window wallpaper space decoration design paint tile adhesive restaurant ceiling tiles specifications
Alloy Steel,Alloy Steel Sheet,Alloy Steel Pipe
Wanlei Steel Pipe Co., Ltd. , http://www.tjsteelpipes.com