In the home decoration, the installation of the baseboard is inevitable. Of course, the aesthetic value of the baseboard has always been greater than its practical value, because it greatly improves the design sense and value of the home decoration, then how to install the baseboard ? Next, the decoration home network Xiaobian will introduce to you how to install the skirting line, the installation process of the skirting line, I hope this article can bring you some help and reference, let us look at it together. !
The first step: preparation in the early stage
Generally speaking, the length of the baseboard is fixed, but there are still some differences in the length of the baseboard that need to be used in various positions. Therefore, we should carefully measure each stage before splicing and fitting the baseboard. How many lengths are used for the baseboard.
Step 2: Preparation of materials
Use a pencil drawing pen, a tape measure, and other tools to measure the drawing line. Define the length of the baseboard to be used, and then use a cutting tool such as a chainsaw to process the skirting material.
The third step: wall drilling
Before we drill, we must first observe the position of the wiring of the water and electricity in the home, so as to avoid some errors, and the spacing of the holes should not be too large, otherwise the baseboard made of solid wood is not good enough to stick to the wall. Drilling must be carried out on the wall using professional tools. Of course, in order to fix the skirting line more firmly, the spacing of the drilling holes is about forty centimeters, and the spacing of the solid wood interfaces is slightly closer. The small wooden strips or expansion plugs are nailed into the newly drilled holes, and fixed. The big nails of the baseboard must use wooden strips or expansion plugs. If it is nailed directly to the wall, the baseboard is not firmly nailed.
Step 4: Fix the baseboard
Before fixing the baseboard, you must first arrange the wall surface. Otherwise, the solid wood baseboard will not fit the wall completely, and therefore some holes will be left. Therefore, we do not need to look at the position that needs to be fixed and the nail hole. When fixing the baseboard, pay attention to whether the baseboard and the wall are tightly attached, and the nail should be completely penetrated. No matter what the material is made of the baseboard, it has the characteristics of thermal expansion and contraction. Therefore, the skirting line against the corner should be like a wooden floor, leaving some distance as a telescopic space.
Step 5: Handle the corners of the baseboard
The skirting of some corners made of solid wood is usually handled by cutting, and the edge of the baseboard cut into 45 degrees is split, so that the corner position of the baseboard is still beautiful after processing.
The above is the introduction of how to install the baseboard for the decoration of the home network Xiaobian, I hope to bring some help to everyone, I do not know if you are satisfied with the introduction of Xiaobian? If you still need more information, please continue to pay attention to our home encyclopedia!
Stainless Steel Screws are available in both 18-8 and 316 stainless steel. Please check out the categories listed below for additional information and sizes.
Sheet Metal Screws and Machine Screws are available in several alloys. These alloys include 18-8 Stainless Steel, 304 Stainless Steel and 316 Stainless Steel. Not all sizes and diameters are available in a specific alloy. Contact our sales department if you don't see the size your looking for.
Stainless Steel Screw,Stainless Steel Eye Screws,Stainless Steel Lag Screws,Stainless Lag Bolts
Taizhou TS HARDWARE Co., Ltd , https://www.shuwengroup.com