In recent years, the focus of home decoration has gradually shifted from the living room and bedroom to the kitchen, thus driving the development of the cabinet industry. In the Foshan cabinet market, various cabinet companies have emerged, and there is a tendency to “spring upâ€. In the home decoration, people pay more and more attention to the practicality and aesthetics of the kitchen. It is quite common to spend a million yuan on a whole cabinet. Recently, many people have called and claimed that the newly installed cabinets and kitchen utensils did not take long to appear various problems. To this end, the reporter asked some industry veterans, how to check cabinets and kitchen utensils.
1 Range hood:
Suction is enough, stability is guaranteed
Mr. Li called the public to complain and said: "In April of this year, my family bought a range hood. During the use, I found that I didn't smoke the oil, and the gear was not right. The whole house was full of cooking fumes." Is there any standard? In fact, only two points need to be paid attention to, namely the efficiency of smoke removal, the cleaning cycle and the difficulty.
The main function of the range hood is to absorb the fumes from cooking in the kitchen. The larger the air volume of the range hood, the more advanced the turbine technology and the higher the efficiency of the smoke extraction. This is also the core of the high-end range hood. standard. In addition to the amount of wind, the stability of the range hood air volume is also a factor to consider.
2 cabinets:
Easy to open and close, the surface is flat and not scratched
If the cabinet is installed, a full inspection must be performed. First, the panels of the cabinet must have a water barrier. Second, there must be a support and force support below the entire panel. Third, there should be no signs of smashing, cracking, scratching, or contamination on the surface, especially at the junction. Fourth, the obvious signs of cementation cannot be seen at the intersection of the countertops, and the glue must be smooth. Fifth, check whether the switch of the cabinet is smooth, and the handle and the door leaf cannot be scratched, damaged or rusted.
It is particularly noteworthy that there must be enough space for the opening and closing of the cabinet. If the cabinet is opened and the door frame is in contact, this is unqualified.
3 sink:
Beware of water seepage and smooth drainage
The sink is the wash basin. Check if the water supply and drainage of the wash basin are smooth and the accessories are complete. When trying to drain, fill the water and see if the water goes down the water outlet.
Secondly, it is necessary to check whether there is any leakage of the drain pipe. Especially in the position where the sink and the counter top are glued, the glue must be tight to avoid the phenomenon of water seepage.
4 Hardware:
Pay attention to small details, affecting the service life
Although the hardware accessories are small, it is the key to the quality of the cabinet. Most consumers lack the basic judgment of the advantages and disadvantages of hardware accessories. In fact, hardware accessories play an important role in the whole set of cabinet materials, and its advantages and disadvantages directly affect the quality and service life of cabinets.
Some cabinet manufacturers on the market use door hinges, slide rails, pull baskets, handles that are not good quality, or allow foreign brands to be approved for foreign brands. The price will be several times. Consumers should pay attention to the details and see the rust and damage of the hardware accessories, and promptly ask the person in charge of the installation party.
For different application scenarios of customers, our R&D department independently designed and developed a variety of Peristaltic Pump heads with different sizes, different appearances, different flow rates, and different types. Support the customization of the number of pump head rollers and the installation shaft. It can be used with the customer's motor and drive. The Peristaltic Pump Head of the peristaltic pump can be customized with different pump head connection brackets and so on according to the needs of customers.
The pump head of the peristaltic pump can be purchased separately or together with our driver or motor.
Different Peristaltic Pump Head has a different flow rate.
The liquid filling of the Peristaltic Pump Head only passes through the hose, does not touch the pump body, and has no valves or seals and other connecting parts. Routine maintenance only requires regular replacement of the hose, which reduces the maintenance cost of the user.
Micro Flow Pump Head,Multichannel Pump Head,Industrial Pump Head,Peristaltic Pump Heads
Baoding Chuangrui Precision Pump Co., Ltd. , https://www.crprecisionpumps.com