Abstract Five kinds of brazing materials were selected respectively to make single-layer brazing discs by furnace brazing. The bonding strength of the abrasive discs and the matrix were measured by measuring the shear strength of the discs. The results showed that HL801 copper-based solder and HL3O4 were used. . The abrasive discs of the silver-based solder have experimentally high abrasive strength, and the grinding discs using the HL8O1 copper-based solder are ground.
Diamond and Abrasives Engineering, 2000, first issue
Diamond and Abrasives Engineering, 2000, first issue
Ningbo Alite Lighting Technology Co.,Ltd , https://www.alite-tmwt.com