Double-sided labeling machine troubleshooting

Double-sided labeling machine tilting problem:

For the problem of tilting, the relevant personnel said, first, try to use soft label materials, good label ductility will also greatly improve the tilting. Second, by changing the shape of the label, the operator can make the bottom end of the label curved and try to avoid the deformation of the seal. Need to be reminded that the arc should not be too deep, if it is too deep, it will wrinkle the label, adding unnecessary trouble. For the special type of sealing, it is necessary to make corresponding changes to the shape of the label, which can avoid the tilting and increase the beauty. Third, to eliminate the influence of static electricity, the double-sided labeling machine is prone to static electricity during the labeling process, which has an adverse effect on the labeling effect. In this regard, the person suggested that the humidity of the labeling site can be appropriately increased, and the use of an ion fan is also an effective solution. Some double-sided labeling machines are also equipped with automatic humidity control inside, so that the internal cleanliness of the equipment can be controlled separately, which not only can keep away from dust, improve the labeling quality of the products, but also solve the problem of tilting and achieve visual effects. Fourth, increase the viscosity of the label. For this method, we can start from three aspects, the first is to improve the surface quality of the hose being attached. In fact, the surface of many products are relatively varnished, and the exudation of the contents, the micropores in the tube wall, etc. will cause the tilting. The second is to control the labeling pressure of the label during the labeling process. Finally, remember to control the temperature during labeling. As the temperature rises, the activity of the internal material will increase, which will increase the viscosity of the label.

Double-sided labeling machine labeling is not neat:

Labeling is not neat and is one of the common problems with double-sided labeling machines. How should the operator solve or avoid such a problem?

Application Environment. The environment is actually a factor that many people ignore. If the environment is relatively humid and the equipment is in a long-term high temperature working condition, the labeling will be inaccurate. Therefore, the operator should place the double-sided labeling machine in a normal temperature working state, and fix the meter head to adjust the standard seat.

Electrical causes and problems with the product itself. There are two electrical reasons, one is power and the other is detection. If the stopwatch is inaccurate, you can reset the parameters of the test eye; if the test object is not accurate, you can adjust the test eye and amplifier to make it accurately and neatly bid; if the drive does not turn or is twirling, The rotating parts can be inspected and tightened. In addition, the labeling is not neat and there may be problems with the product itself. At this time, the operator is required to contact the manufacturer.