main ingredient:
Portland cement, lead-free pigments, quartz sand and additives.
Jointing time:
Wait until the tile or stone is pasted for 24 hours. It can be directly used for slits with a width of 1mm to 5mm.
Stirring:
The amount of water added is based on the construction consistency. Stir well and let stand for 10 minutes, then stir and use. The water-cement ratio is about 1:4, and the grout after mixing thoroughly should be completed within 4~5 hours. Do not mix other materials.
consumption:
In theory, 1 kg of powder can meet the caulking requirements of 3 to 4 square meters of tiles (slit width 2 to 3 mm). The actual amount varies depending on the method of construction, the width of the caulk and the amount of filler.
Instructions:
Pour the special stirring solution of the grout into the clean container, slowly add the grouting agent, stir evenly to the uniform paste without the powder group, let stand for 3-5 minutes, then add the stirring.
Construction matters:
The joints can be filled after the bricks are bonded for 24 hours.
The gap of the tile should be cleaned, and the joints should be free of oil and floating ash. If it is too dry, it can be sprinkled with water. Fill the sealant mortar with a tool and compact it. After the sealant is initially cured (15-30 minutes), use the micro-wet sponge to clean the excess caulking agent on the tile surface.
Do not fill the joints when it is wet or rainy. Avoid raining within 24 hours after filling.
Implementation standards:
Technical standard: JG/T547-94; environmental protection standard: GB18583-2001.
Storage, transportation and packaging:
Store in a cool dry place with a shelf life of 6 months. The product is non-toxic and non-combustible, and the storage and transportation can be handled in accordance with the Non-Dangerous Goods Regulations.
Check Valve,Silencing Check Valve,Ball Check Valve,Butterfly Check Valve
Zhengzhou guan hao yong International Trade Co., , https://www.mobilehomepipe.com