Technical parameters Performance characteristics 1, long life, reliable performance, brightness is 10% to 20% higher than similar products, eliminating the hassle and inconvenience of frequent replacement of light bulbs.
2. The transparent parts are optimized and designed to provide soft light, uniform illumination, no ghosting, and effective avoidance of eye discomfort and fatigue. 3, exquisite structural design, good heat dissipation, effectively reduce the temperature of the lamp body, improve lamp service life. 4. It has good electromagnetic compatibility and will not cause any interference to various electrical appliances and power transmission networks.
5, the shell uses high-tech surface coating technology, wear resistance, corrosion, waterproof and dustproof, suitable for a variety of harsh environments.
6. The shell adopts imported light alloy, supplemented by multiple decompression seismic design, and good impact resistance.
7, seat type, ceiling type, wall-mounted and other installation methods, safe, simple and convenient.
Technical Parameters
parameter name
unit
Value
Input power
Rated voltage (AC)
V
220
Introduce cable outer diameter
Light fixture
Mm
Φ8~φ10
Ballast box
Φ8~φ14
Dimensions
Lamp outside diameter
Mm
Φ180
Lamp length
230
total height
320
weight
Light fixture
Kg
4.3
Ballast box
4.2
With light source
Order number
light source
Rated power (W)
Luminous flux (lm)
Average service life (h)
BC9500-J70
MH
70
6000
20000
BC9500-J150
MH
150
15000
20000
Use <br> <br> determine where and how the lamp according to the actual needs of the job site, then the electrical power contacts to prepare Φ8 ~ Φ14mm three-core cable in accordance with the corresponding length of the lamp.
Open the end cap of ballast, loosen the pressing nut of the ballast cable inlet, and lead the lamp cable and power cable through the compression nut to the internal terminal of the ballast, connect and fix, and tighten separately. Cables tighten nuts and tighten ballast end caps.
According to the determined installation location and method, the lamps and ballasts are installed, and the other end of the input cable of the ballast can be connected to the 220V power supply according to the requirements of explosion-proof.
Loosen the screws at the bottom of the lamp holder bracket, and adjust the lighting position by rotating 360° around the lamp holder; loosen the screws on both sides of the lamp holder, adjust the lighting angle of the lamp holder up and down according to the lighting requirements, and then fasten the screws.
When replacing the lamp, use a suitable screwdriver or other tool to insert the front cover into the holes on the two front side of the front cover, remove the bad lamp, and replace the new one.
Note 1, the lamp is installed in the equipped carton during transportation, and foam shock absorption is added.
2. When installing and maintaining the lamp, you must disconnect the power supply.
3, when used, the surface of the lamp has a certain temperature rise, which is a normal phenomenon; the temperature of the center of the transparent part is relatively high and must not be touched.
4. When replacing the bulb, use the bulb of the same type and power; if you change the bulb type or power, replace the matching ballast accordingly.
Safety Warning 1. It is forbidden to turn on the lamp when it is charged.
2, non-professionals are not free to install, remove lamps and ballasts.
A prism is a transparent optical element with flat, polished surfaces that refract light. At least two of the flat surfaces must have an angle between them. The exact angles between the surfaces depend on the application,prism: In optics, piece of glass or other transparent material cut with precise angles and plane faces, useful for analyzing and reflecting light.
Dispersive prism can be used to break light up into it's constituent spectral colors(the color of the rainbow).Furthermore, prisms can be used to reflect light or to split light into components with different polarizations.
Optical Prism include Right angle prism.Equilateral dispersing prism.Dove Prism.Corner Cube Reflectors.Beamsplitter, Powell prism, dove prism, wedge prism, penta prism etc.
Optical Right Angle Prism,Optical Equilateral Prism, Dove Prism,Wedge Prism
Changchun Ruiqi Optoelectronics Co.,Ltd , https://www.ruiqi-optics.com