First, the reasons why submersible pumps do not produce water or water:
(1) The motor did not start.
(2) The pipeline is blocked.
(3) The line is broken.
(4) The filter is blocked.
(5) Absorbent mouth exposed to water.
(6) Inverted electric pump.
(7) The pump seal is damaged and the impeller is worn.
(8) The flow path of the impeller or the deflector is blocked.
(9) Broken rotor bars.
Second, the troubleshooting method:
(1) Eliminate circuit failures (such as the voltage is too low or the line is missing) to solve the pump stuck problem.
(2) Clear up the blockage.
(3) Repair the broken place.
(4) Clean the filter screen and remove the blockage.
(5) Discharge the pump and place the pump in water. If the water is still not in use or exceeds the range of use of the electric pump head, it is recommended to replace the pump with a high head.
(6) Reverse the phase sequence of the cable connector so that the motor turns in line with the direction of the pump.
(7) Replace the new seal ring and impeller.
(8) Clear the flow path and remove the blockage.
(9) Replace the rotor.
(1) The motor did not start.
(2) The pipeline is blocked.
(3) The line is broken.
(4) The filter is blocked.
(5) Absorbent mouth exposed to water.
(6) Inverted electric pump.
(7) The pump seal is damaged and the impeller is worn.
(8) The flow path of the impeller or the deflector is blocked.
(9) Broken rotor bars.
Second, the troubleshooting method:
(1) Eliminate circuit failures (such as the voltage is too low or the line is missing) to solve the pump stuck problem.
(2) Clear up the blockage.
(3) Repair the broken place.
(4) Clean the filter screen and remove the blockage.
(5) Discharge the pump and place the pump in water. If the water is still not in use or exceeds the range of use of the electric pump head, it is recommended to replace the pump with a high head.
(6) Reverse the phase sequence of the cable connector so that the motor turns in line with the direction of the pump.
(7) Replace the new seal ring and impeller.
(8) Clear the flow path and remove the blockage.
(9) Replace the rotor.
According to the action requirements, when clamping drill pipe, can achieve the fixed drill pipe; When the drill pipe is relaxed, it can be lifted or lowered.
We mainly produce various specifications and standards of geological core drill rods,core barrels, over shots ,various standards of impregnated synthetic diamond core bits,surface-set diamond bits,PCD reaming shells, surface-set reaming shells, PDC bits and so on.We have strong product development capabilities.Welcome customers to come to our factory to order products.
Foot Clamp,Clamping Drill Pipe,Clamp Foot,Sure Foot Clamps
WUXI XINZUAN GEOLOGICAL EQUIPMENT CO.,LTD. , https://www.wxsmrxz.com