When the operation method is started, first close the vacuum chamber pressure relief valve, then open the Vacuum Pump, spray water to the inside of the rubber plate by hand, and gently push the door by hand. The door is immediately sucked by the indoor negative pressure, about 23 minutes later. Press the power and turn it on again. When the machine is shut down, first open the vacuum chamber pressure relief valve. After about 20s, the gauge pressure drops to 0.005MPa and then stop the vacuum pump. Due to the elastic action of the rubber plate, the vacuum chamber door will automatically bounce off after the pump is stopped. The purpose is to prevent vacuum chamber negative pressure backwater (referring to water ring type, water jet pump). After the improvement, the switch door does not need bolt fasteners, the switch door operation is flexible and convenient, saves time and increases production, the transformation cost is low, and the use effect is good, which is beneficial to the transformation of the old model in the same industry. As the country restricts clay brick making, the production line of industrial waste slag bricks such as coal gangue and fly ash will gradually increase; the products will also develop from ordinary bricks and perforated bricks to various hollow bricks; the molding process will also develop from soft plastic molding to semi-hard Plastic and hard plastic molding; the power of the extruder increases from several tens of kW to several hundred kW; the allowable extrusion force is increased from 1 MPa to 4 MPa. All of this puts higher demands on the drive system of the extruder. Only when the hard-toothed gear transmission is used to replace the traditional soft-toothed gear transmission can the domestic clay extruder be upgraded to a new level. After many years of use and practice, the hard-toothed gears manufactured by the above process have lower cost, and their service life and trouble-free working time are much higher than JC342#2-91 standard, which has high reliability and is brought to the user. It has come up with very good benefits and won praise from users. It is a technology worth promoting.
Nutsche Filter With Top Stainless Steel 316
Nutsche Filter With Top Stainless Steel 316 means Top filtration container and filtration plate is made of stainless steel 316 with high quality .
Nutsche filtration setup will be nutsche filter with vacuum pump for filtration and separation
Stainless steel nutsche filter 10l 20l 30l 50l 100l with vacuum pump as filtration and separation system turnkey setup
Vacuum Filtration Apparatus Stainless Steel Vacuum Filter Chemistry,glass filter with vacuum pump ,vacuum filter for lab,nutsche filter dryer cbd
Zhongyi Kori(Zhengzhou)Equipment Co.,Ltd , https://www.korireactor.com