We know that nowadays people use more and more electrical appliances. With electrical appliances, it is surely that they will end with sockets. At this time, a multi-use socket is needed to meet people's requirements. However, it must be operated correctly when it is used. The following Xiao Bian will introduce to you about how to correctly use the porous socket and explain the use of porous socket tips.
1. First of all, if your socket is a newly purchased multi-hole socket, you must perform a special inspection at this time. In this way, you can open the socket. At the same time, you must remember to check whether the contact copper is qualified. The specific approach is: as long as the socket is opened, and then you can remove the copper sheet, generally like the qualified copper sheet thickness is also relatively modest, and the use is still the kind of pure copper material; if you use some copper, Or some other metal material (such as iron sheet, etc.), such a product is not qualified, the next step is to check the pressure spring to see if the spring is good, if it is the use of insulating material, then it is high quality. After the inspection can meet the requirements, then it can be installed and used.
2, in use, but also consider a problem is the rated voltage and rated current socket. Under normal circumstances, the commonly used voltage is 250V, current 10A, if the total load power of the appliance is less than 1500W, then you can connect multiple appliances to use; if you use more than 1500W, then this time It is necessary to pay special attention to the fact that some people do not take into account the rated current of the socket when using multi-hole sockets. This use is blind and very dangerous.
3, in the use of the process, but also pay attention to whether the electrical switch and plug is not, generally we connect the appliance, remember to turn off the power switch, this time insert the plug again. If the plug of the electrical appliance is inserted in the open position with the power switch of the appliance, the use of the appliance will easily cause heating of the contact portion and affect the service life of the plug.
4. Sockets with three-eye sockets, generally speaking, the top of it will be marked with a symbol for grounding. At this time, the dedicated ground wire should be introduced into the ground of the socket, and the neutral wire or phase wire must not be connected to it.
5. In the course of use, if there is a phenomenon such as a fire inside the socket or poor contact, the use of electrical appliances should be stopped immediately. The socket must be repaired in order to check which part is in poor contact and can be used after repair.
Summary: About the correct use of porous socket Related content introduced to this, the above detailed introduction in the use of porous socket should be if you operate, if you encounter a problem with the socket should be how to deal with, as long as you know ahead of time these know, can avoid some unnecessary Things happen. I hope that the above introduction will help everyone.
Recessed LED Downlight with built-in Microwave Motion Sensor
| Model | AM-6.0GY |
| Luminous flux | 800~900lm |
| Luminous Efficacy | >80lm/W |
| Colour Rendering index | 80 |
| Beam Angle | 140° |
| Light Decay | <30% over 10,000 hours |
| Rated Lifespan | >30,000 hours |
| Power consumption | 10 watts |
| Input voltage / Frequency | 80-260vac 50-60HZ |
| Reflector / Diffuser | Frosted diffuser |
| Operating Environment | -20°c~+50°c |
| Dimensions | Φ193*77mm |
| Hole Cut Size | Φ160~Φ180mm |
| LED Source | 56pcs SMD2835 |
| Working mode | ON/OFF or Full/Dim |
| Sensor Range | 180*360 degree |
| Sensor Distance | 6-8m Radius |
| Delay Time |
18-25s |
Sensor Led Down Light,Recessed Led Down Light,Led Ceiling Down Light,Smart Down Light
JIANGMEN MOSCOT OPTOELECTRONIC TECHNOLOGY CO.,LTD. , https://www.zjsensorsled.com