How to apply glyphosate in vegetable fields

Glyphosate, also known as Nongda, Zhencao Ning, Peasant Music, etc., is an organophosphorus herbicide with an active ingredient of glyphosate. It has a systemic broad-spectrum herbicidal action on weeds for stem and leaf treatment. It can kill the subterranean part of perennial deep root weeds, but it will soon fail when it encounters soil, which is ineffective for unearthed weeds.
Use glyphosate, generally weeds out, 4-6 leaf stage, use 10% water Jing 0.5-1 kg per mu, add 100 ml of diesel, add water 20-30 kg, evenly spray weed stems and leaves.
Glyphosate is used for weeding in vegetable fields. It should be used when there is no vegetable in the vegetable field. It can be used as a 10% water agent 0.5-1 kg per acre to eliminate weeds such as crabgrass, bluegrass, hedgehog and wild pea. Use 10% water agent 1-1.5 kg to eliminate weeds such as fragrant aconite, plantain, small canopy, and annual canopy. Use 10% water agent 2-2.5 kg to eliminate weeds such as white mullet, reed, plough grass, half awning, dog tooth root, and pinellia. Both are 60-75 kg of water, and the whole field is sprayed.
When weeding stems and leaves on weeds, it is strictly forbidden to contact the crops with vegetables and other crops to prevent phytotoxicity.
When the leeks field is used to kill grass, it should be used on the day after harvesting the leeks (cannot be used until the next day), using 41% of the nutrient solution, in the field of annual weeds, 0.2 liters of water. In the field of perennial weeds, the water is 0.3 liters, 30 kilograms of water, and the whole body is sprayed with liquid.
When the daylily field is used to kill grass, it can be used in the flowering period of daylily, with 10% water agent 1-2 kg, 50 kg water, whole field spray, can eliminate white stalk, double-spotted gar, dog tooth root, yellow (purple) incense Attached weeds.
When applying the drug, the nozzle with a 0.8 mm aperture is better than the nozzle with a 1.0 mm aperture. The agent is effective only after it has been contacted with the stems and leaves. It should be evenly sprayed to allow the weeds to adhere to the agent.
Use a lower hardness of the water to match the pharmaceutical liquid, the used sprayer should be repeatedly cleaned to avoid other crop damage caused by future use. It should not be mixed with quick-acting herbicides such as dimethyltetrachloride and gram. For example, adding 0.1% detergent powder to glyphosate or adding 30g diesel oil per acre can enhance the efficacy.

ã€Commentã€‘ ã€Print this articleã€‘ ã€Close this pageã€‘ ã€Large, medium and smallã€‘

Precision Steel Tube are produced by Cold Drawn and Cold Rolling, with very good OD and ID tolerance and smoothness ,

with very good Concentricity, Good Roundess, Less Deviation, suitable for machinery.

Cold Drawn Seamless tubing (also known as CDS steel tube. Cold Drawn Seamless tubes offer tight tolerances compared to Hot Finished Seamless tube, and offers stronger physical properties compared to other mechanical tubing.

CDW Steel Tubes is made by drawing the ERW tubes from the tube mills through a plug and die combination, mounted on the draw bench. The end tagged and annealed tubes are drawn through a closely machined die that controls the outside diameter of the tubes. At the same time the tube passes over a plug that controls the inside diameter. Further, the manufactured tubes are processed by the downstream facilities for different industry applications.

Technical Standard according to:

ASTM A513, ASTM A519,

DIN2391, EN10305-1, EN10305-4,

SAE J 524, SAE J525 etc.

Steel Grade:

SAE 1010, SAE 1020, SAE 1026, SAE 4130, SAE 4140.

ST35.8, ST37.0, ST52, E235, E355, 42CrMo4,etc

Sizes:

OD: 4.0 to 350mm

WT: 0.5 to 50mm

Length: Cutting Length available, max 12000mm according to Customer PO.

Precision Steel Tubes Seamless Precision Steel Tubes