The use factors mainly refer to whether the installation adjustment, use and maintenance, maintenance and repair, etc. meet the technical requirements. According to the technical requirements of SKF bearing installation, use, maintenance and maintenance, monitor and check the load, speed, working temperature, vibration, noise and lubrication conditions of the bearing in operation, find out the cause and immediately adjust the cause, make adjustment It returned to normal. The installation condition is one of the primary factors in the use factor. The bearing is often changed due to improper installation, and the force state between the parts of the whole bearing changes. The bearing is operating in an abnormal state and ending the service life early is mainly due to the fact that the bearing is not properly installed. Refers to the three major factors that determine the quality of the bearing, such as structural design, manufacturing process and material quality.
The metallurgical quality of imported bearing materials was once the main factor affecting the early failure of rolling bearings. With the advancement of metallurgical techniques (such as vacuum degassing of bearing steels), the quality of raw materials has improved. The proportion of raw material quality factors in bearing failure analysis has dropped significantly, but it is still one of the main factors affecting bearing failure. The proper selection of materials is still a factor that must be considered in bearing failure analysis.
Bearings are generally manufactured through multiple processes such as forging, heat treatment, turning, grinding and assembly. The rationality, advancement and stability of each processing technology will also affect the life of the bearing. The heat treatment and grinding processes that affect the quality of the finished bearing often have a more direct relationship with the failure of the bearing. In recent years, research on the metamorphic layer of bearing working surface shows that the grinding process is closely related to the bearing surface quality.
The main task of SKF bearing service life analysis is to find out the main factors causing bearing failure based on a large amount of background materials, analysis data and failure modes, so as to propose improvement measures in a targeted manner, prolong the service life of bearings and avoid bearing protrusion. Early failure of the hair.
QFAP supply various kinds of Housing castings/ casting housings to all over the world.
Housing Casting process include Lost-wax casting, Counter gravity casting, Lost-foam casting, Low pressure die casting, resin casting , sand casting and aluminum die casting.
These Casting housings which QFAP supplied normally got fine machined, and applied in diggers, excavators, lawn mowers, trucks and construction machineries.
Main of our customers is from North America, Europe and Chinese domestic market, Such like John Deere, Wood-Mizer, WLY, etc.
Materials: carbon steel, stainless steel, alloys steel, aluminum, zinc, grey iron, ductile iron, etc.
Surface treatment: painting, zinc plating, blackening, passivation, nickel plating, anodizing, polishing, etc.
Heat treatment: according to customer`s requirement.
QFAP have specialized in producing high precision Agriculture Parts more than 10years, Because of the long term cooperation, we could supply our customers not only the products but also our recommendation on the designs to saving costs.
Casting Housing,Casting Die Housing,Cast Aluminum Housing,Casting Extrusion Housing
SHAOXING QIFENG AUTO PARTS CO., LTD. , https://www.sxqfap.com