The bathroom occupies the vast majority of the daily water consumption of the family. The choice of water-saving sanitary ware allows us to unconsciously save a lot of valuable water during daily use. The quality of bathroom equipment also plays an important role in the comfort of life, and the sanitary equipment using various new technologies has created a new modern (decoration effect) bathroom space.
The bathroom occupies the vast majority of the daily water consumption of the family. The choice of water-saving sanitary ware allows us to unconsciously save a lot of valuable water during daily use. The quality of bathroom equipment also plays an important role in the comfort of life, and the sanitary equipment using various new technologies has created a new modern bathroom space for us.
Key words: Reuse, pressure-assisted Some sanitary ware manufacturers have greatly improved the utilization of water through unique product design, and the water-saving capacity of the toilet has been further improved.
It is a pity to wash the dirt in the toilet with pure tap water. Some sanitary ware manufacturers have installed hand-washing faucets and embedded small wash basins on the water tank of their toilets. The user can wash their hands after each convenient time, and the sewage will flow into the water tank for storage. For the use of toilets, this type of toilet has achieved secondary use of sewage, and the achievements in water saving are obvious.
In order to improve the flushing effect of the toilet under the premise of reducing the flushing amount, some manufacturers have added a pressure-assist flushing system to the toilet. Whether it is a flushing type or a siphoning toilet, they belong to the category of gravity sanitary ware. The gravity is flushed. In contrast, the pressure-assist operation mode is relatively novel, water flows into the water inlet system and compresses the air accumulated in the water tank. When the toilet bowl is flushed, the compressed air causes the water to be ejected from the water tank at a high speed. The toilet bowl of the toilet is specially designed to absorb this water flow. The whole flushing process is preached for four seconds. The accelerated impulse generated by the water spray can easily push the dirt in the potty out of the drain pipe. Therefore, many use pressure-assisted flushing technology. The toilet can be flushed with only 4 liters of water, which is less than the 6 liters of water mandated by the state.
Water saving faucet
Key words: faucet flow regulator, constant temperature installation of the flow stabilizer at the outlet of the faucet is also an effective water saving method. The faucet flow regulator is usually constructed of a metal mesh cover (partially plastic) that is cut into a large number of tiny water columns with air interposed in the middle as the water flows through the mesh cover. Due to air injection and pressure, the faucet water beam equipped with the stabilizer is larger than the traditional faucet, and the water flow feels smooth, which saves the water while saving the water.
According to tests, the faucet (renovation effect map) with the stabilizer is installed, which saves 70% of the water consumption compared to the faucet without the stabilizer.
The shower head with the hot and cold water (the decoration effect picture) and the bathtub (the decoration effect picture) faucet must be re-adjusted before each water discharge, which will inevitably waste a lot of water. If you have a thermostatic faucet for your shower and bathtub, the problem is solved. When the water temperature changes, the thermostat automatically adjusts the balance of the hot and cold water to keep the water temperature constant, thus avoiding re-tempering and wasting a lot of water.
Water saving shower
Keywords: air/water flow mixing technology. Some high-end brand showers currently on the market have similar designs. They draw in a large amount of air through the small holes in the shower surface, and the air is combined with water in the interior of the shower to generate A stream of water mixed with numerous bubbles flows out evenly from the spray holes to form large, soft water droplets. The air and water streams can be mixed in different proportions, with a mixing ratio of up to 5 1, ie 5 litres of air mixed with 1 litre of water. According to estimates, to achieve the same cleaning effect, showers using air/water mixing technology can save up to 10% of water than traditional showers.
Water bath
Key words: taking into account water consumption and comfort For families seeking water-saving effects, when choosing a bathtub, consumers should not only choose the size of the bathtub in the size of the bathroom (renovation effect map), but should be based on the actual conditions of the user. Choose a bathtub that takes care of water and comfort.
Some sanitary ware manufacturers have introduced a water-saving bathtub at the right time, mainly relying on the reasonable combination of length, width and height to adjust the volume, thus achieving water saving. The length of the water-saving bathtub is generally 1.5 meters (about the length of an adult), and the depth is often deeper than the ordinary bathtub, between 50cm and 70cm. Moreover, the design of the water-saving bathtub conforms to the function line of the human sitting posture, so that the water is not lost a lot to achieve the purpose of water saving. It saves about 20% of water in an ordinary bathtub, but it also makes the bather feel comfortable. This type of bathtub is especially suitable for the elderly and children because of the small size of the bottom of the cylinder and the easier standing than the bathtub.
Oak Fancy Plywood,Oak Plywood,Oak Veneer Plywood,Marine Plywood
Linyi Fengzhize Trading Co., Ltd. , https://www.fengzhize.com