The paint is very mysterious, Ayutthaya is very deep. They are different and they all look the same. Thousands of people have a metal jacket; below the hat is a pure white face; after smearing the wall, they all show delicate skin.
For such a seemingly incomprehensible paint, I have always been lack of brain cells to recognize the essence, as well, please help me check it. There is no habit of "not seeking the best, but seeking the most expensive."
Putty is an important substrate of paint, which directly affects the quality of wall paint, and should be given enough attention.
Principle one buys what one needs
It is difficult to say which kind of coating is cost-effective and the key is its own needs. At present, the properties of paints are mostly concentrated on scrubbing, mildew proofing, antibacterial, and covering fine cracks, etc. The price of paints also increases with the increase of functions. Before buying, think about your needs first. The most expensive ones are not necessarily useful to you. For example, some scrubbing times can reach more than 20,000 times, and some are 3,000 times. The price of the former is naturally much more expensive. However, the state stipulates that the number of rubbing resistances as long as it has reached 1000 times is qualified, so whichever one of you choose depends on your own Needed; Another example is, some houses are sunny, well ventilated, and the function of anti-mildew must not be wasted.
Principle two does not believe in advertising
Clear up the cloud of paint advertisements, and directly request relevant testing methods, testing standards, and authoritative testing agencies to verify the authenticity of the product. For example, the so-called nano-coatings are unworthy of their name, and there are no internationally recognized testing standards.
Principle 3: Let go and buy domestic goods
At present, imported coatings account for about 45% of our coating market, and they mainly occupy our high-end market. Their prices are 20%-50% more expensive than domestic coatings. However, the testing results of 10 Chinese and foreign paint brand comparison tests released by the National Chemical Building Materials Testing Center in 2003 prove that Fuya, Jiabaoli, and Qianxiehua are comparable in quality to foreign brands such as Nippon and Dulux.
â– lazy tricks
On-site purchase to master the top five
Buy the heaviest package
Lift the paint bucket and shake it. If there is a crackling sound, it means that the packaging is seriously inadequate. There are two shortages of gins, and the viscosity is too low. The formal factory is real and does not hear the sound.
Buy the least consumption
Consultation with merchants about the number of painting passes and the area of ​​painting, the amount of calculation and the cost per square meter of material are not deceived by the price of each group (barrel), the unit price is low, and the consumption is particularly large. It is more expensive and wasteful. , And the quality is poor.
Buy professional supportive
Good quality products are often more professional, and provide technical guidance and after-sales services, including pre-sale consulting, construction guidance and advice in the sale, after-sales maintenance, etc., Moreover, the regular manufacturers provide colorful model colors .
Buy full information
There are clear trademarks, origins, contact telephone numbers, net weights, corporate commitment standards, etc. on the packaging of the genuine paint, and its website can be opened. The no-name paint is often marked with fake addresses, telephones and websites.
Buy "trustworthy business"
The trustworthy enterprises are directly purchased from the market by government agencies, and only if there are no complaints during the entire year will they be on the list.
â– Sound
Beware of two issues in the paint market
The first problem is too much dark current in the paint industry. There are more than 8,000 companies in China that are on the list. If they are not registered, they cannot be counted. The entire industry is confusing and the brands are uneven.
In the industry, it is not uncommon for a project to set up a paint factory and a home improvement company to set up a factory. These factories are not registered in the industrial and commercial sector, they are not registered in the Ministry of Construction and are not monitored at all; the second is that products are not subject to inspection and supervision. Coatings produced in this way, not to mention environmental protection, may not even meet at least the technical specifications. Consumers must be vigilant. Do not buy unnamed company products because they are inexpensive.
The other is the putty problem. Putty is an important substrate that attaches to the wall surface, fills the wall surface, and connects the wall surface and the paint. Its quality problem does not seem to attract everyone's attention.
In fact, at present, many wall problems are caused by putty. Think about it. A large bag of putty on a stall is worth seven or eight yuan. Can there be any quality problems? Many bad putties are actually white ash. They are prone to cracking and peeling. Some putties have poor adhesive properties. They contain 107 glue that has been banned from use. This glue is not waterproof, and it will lose its softness when it meets water, and it will evaporate. Pollutant gas - formaldehyde.
Paint coating paint paint door prices home improvement house
Water Pump Part Series
1) Aluminum die casting part/Water Pump Part series
2) Water pump part series conforms to ISO9001 standard
3) Clients' drawings and samples are highly followed.
4) Machining all sorts of styles, according to customers' requirements
5) Strong R&D center design system and strict inspection processes to ensure the water pump part series quality.
6) Aluminum Die Casting suitable
for communications, auto parts, lamp part series, water pump part
series, power tool series, radiator part series, anti-static flooring
products and Other Series Products.
Water Pump Part Series Production Flow:
Drawings→ mould making →raw casting → sandblasting →rough machining or
finish machining →surface treatment →product check→ packing →delivery
strict
 |
 |
Our Advantage
(1) Ten years of experience in manufacturing and exporting water pump part series.
(2) OEM and custom-made service for water pump part series.
(3) All kinds of castings can be manufactured according to drawing, sample or specific industry standard.
(4) Strong engineering team makes high quality
(5) The coordinated service (casting, machining and surface treatment) make lower price possible.
(6) Advanced-level equipments.
(7) Full material testing process and quality control system.
(8) water pump part series quality warranty and on time delivery.
If you are interested, please contact us to talk about the details for water pump part series. You need to send us your drawing or sample to make mold first. Then we quote you price, if price accepted, we will open mold for you and send you sample before mass production.
Water Pump Part Series
Water Pump Part,Die Casting Water Pump Part,Aluminium Die Casting Parts
Ningbo Bowang Machinery Co.,Ltd , http://en.zjbwjx.com