The machine tool industry has always played an important role in the Swiss industry. According to the latest statistics of The Swiss Mechanical and Electrical Engineering Industries (SWISSMEM), as of the third quarter of 2008, the number of 90 machine tool member companies in the association was 11,941. .
Data show that in the first three quarters of 2008 (data for the fourth quarter will be released at the end of February), the total number of orders in the Swiss mechanical and electronic engineering industry fell by 12.7% compared with the same period in 2007, with orders from Switzerland falling by 4.4% year-on-year. %, the year-on-year decline of orders from abroad was 14.8%.
If only in the third quarter of last year, the number of new orders of SWISSMEM member units is more significant than that of the same period of the previous year, which is 20.2%, of which, the number of domestic orders has dropped by 9.2%, and the foreign market has dropped by 22.9%. . In terms of sales, sales in the third quarter of 2008 continued to rise by 6.5% compared to the same period in 2007. Among them, the Swiss domestic market increased by 1.9%, and the overseas market increased by 7.8%.
According to SWISSMEM statistics, in the first three quarters of 2008, Swiss machinery and electronic engineering products exported 60.759 billion yuan (unit: Swiss franc, the same below), an increase of 5.8% year-on-year; in 2007, this increase was two The number is 13.3%. During the same period, the total amount of Swiss mechanical and electronic engineering products sold to EU (EU) and EFTA (European Free Trade Association) amounted to 40.1 billion Swiss francs, which accounted for 65.9% of the total SWISSMEM membership; and sold to Asia. The part accounted for 10.8%.
Further research statistics can also be found that, from the situation in 2007, the largest consumer of Swiss machine tools is Germany, with a consumption of 1,415.8 million, an increase of 15.2% over the same period of the previous year, accounting for 24% of the total sales of Swiss machine tools; The Swiss native has digested 18% of the machine tools, with a total consumption of 1.0489 billion, an increase of 28.4% year-on-year.
It is worth mentioning that the total value of Swiss machine tools sold to China in 2006 and 2007 reached 270 million and 327.9 million respectively, an increase from the same period of the previous year, which was as high as 33.5% and 21.4% respectively. Undoubtedly, the importance of the Chinese market is increasing for Swiss machine tool manufacturers.
Compared with 2002, the output value of machine tools, machine tool components and accessories in Switzerland in 2003 has been slightly reduced, but the output value in 2004 has rebounded again, reaching a level that is basically the same as in 2002 and slightly exceeded. After that, the entire machine tool industry entered a period of rapid development, especially in the past two or three years. From the perspective of the whole machine, the output value in the first three quarters of 2008 has basically remained the same as that in 2005. It is not difficult to find that the Swiss machinery manufacturing industry has experienced a rapid growth, and now the speed has slowed down slightly.
Phlizon`s COB series Grow Light emits all the wavelengths of light which can be fully absorbed by the plants to create.
Best full Specturm designed to perfectly match large areas of indooor plants, especially for Medical Plant.
COB + Dual-chip,most efficient spectrum,high PPFD.Two cooling fans with double ball(import from Japan) and big aluminum heat sink to protect the grow lights from high temperature,good cooling,long lifespan.Photosynthesis and promote healthy growth budding and flowering.
1000w/2000w /3000w COB LED Grow Light, it will give you more options when your plants need different strength of illumination.
Grow Lights are a great choice for growers who are dealing with hot HPS lights and want to change to something that's going to run cooler. Although LED Grow Lights do produce heat,the smaller models might not bring up the temperature of your grow space.Even the more powerful models of LED grow lights that produce a lot of heat still have built-in cooling systems to help prevent the heat from beaming directly down onto your plants.
3000w led grow light Features
Indoor grow light
COB series, high power branded CREE COB with high Par value and deeper penetration
VEG/BLOOM and STRONGER switches for each grow stage.
Special spectrum for plant growing to increase the yield.
Building to Harvest: Beneficial for seeding to fruiting stage.
Good quality fans with low noise.
Easy to install by minute
Energy Saving, environmental friendly
3 Years Warranty
Compare led grow light to traditional HPS/MH grow light
WHAT MAKE UP AN EXCELLENT LED GROW LIGHT ?
1.PPFD Value : PPFD is Photosynthetic Photon Flux Density. When you choose a plant light, you should compare the PPFD values of different plant lights. The larger the value, the better the growth of the plant.
2.Actual Power: Because the actual power of the plant light always varies with different conditions, all Amazon sellers use the rated power to describe the power of the product because the rated power is constant. When you pick a LED grow light, the rated power of the plant light is a reference, and more importantly is the actual power.
3.Core Coverage: In addition to the above two, when you choose a plant light, you also need to compare the cover area of different plant lights, of course, the size of the core coverage area. In general, in germination stage, you can hang the plant light higher and the cover area is larger. In flowering stage you can hang the plant light lower and the cover area is smaller because the plant needs more light at this stage. You have to compare different coverage areas to choose the plant light that suits you.
Detailed images of 1000w 2000w 3000w 400w cob led grow light
Applications
Hydroponics, Horticulture, Agriculture and Greenhouse
Locations: Farm, Exhibition, Garden, Home, Urban, Bonsai, and University Lab
Growth of Fruits, Vegetables, Flowers and so on
Seeding, Rooting, Breeding, Flowering and Fruiting period
Packaging and Shipping
2. By Air or by Sea for batch goods, for FCL; Airport/ Port receiving;
3. Customers specifying freight forwarders or negotiable shipping methods!
4. Delivery Time: stock avaiable sample will be delivered immediately ; 3-7 days for trial order; 7- 25 days for batch goods
Suggestions:
1.Clean the dust inside every 6 months to ensure the good heat dissipation and long life time.
2.Don`t keep too short distance to the plant canopy to avert leaves bleaching.
3. Highly hang the lamp will weaken the energy and affect the growth cycle of the plants, so the lamp should not be hang too high.
4. While taking care of the plants, please spray the leaves and branches 2-3 times everyday, to ensure the plants do not wrinkle a wither, and have no phenomenon of few fruit, and hard pericarp
Trade Terms
Payment: T/T, L/C, Paypal, 30% deposits before production, 70% balance to be paid before deliverying(Western Union are welcome)
Sample will be delivered within 7 working days.
Discounts are offered based on order quanlityes.
MOQ:sample order are acceptable
Delivery ways:DHL,UPS,FedEx,TNT, door to door,by sea,by air,etc.
PHLIZON LOOKING FOR DISTRIBUTOR ALL OVER THE WORLD
If you are interested in, and
1.own several store for agriculture in your local market
2.or in the business of grow light equipment
3.or good relationship with grower or greenhouse owner
To be a distributor, max support will be offered:
1.price support
2.technical support
3.new product support
4.24 hours after-sales service online
Optic Cree Cob Grow Light,600W Led Indoor Grow Lights,630W Led Grow Light,Cob 3000W Grow Light
Shenzhen Phlizon Technology Co.,Ltd. , https://www.szledaquariumlighting.com