1) There is a pit distance from the toilet. There are 3040 pits in the market. Pay attention to the pit distance in your room and do not neglect it.
2) Table top faucet and counter basin. Countertop faucet has single hole three holes, counter basin also has single hole three holes, single hole faucet can not be installed on three-hole basin, and vice versa.
3) floor length. The floor of the market has a length of 9091, such as the floor with 91, the grid with 30 grid stalls, then there is 1CM floor outside the grid outside the joist, causing the floor sound.
4) Sanitary equipment. Three-piece suit.
5) Aluminium buckle plate. Whether to distribute the keel
1, ceiling wood keel wool should use not less than 30 * 4mm white pine or red pine.
2, ceiling cover plate commonly used paper and cotton gypsum board, aluminum buckle board, PVC buckle board and so on.
3, the surface should not use multilayer board production.
Bathtub ---- Nowadays, there are three types of bathtubs: Cast Iron Cylinder, Acrylic Bathtub, Acrylic Bath, Polyester Agate Cylinder, Vickers, Resin, etc. The latter three are not frequently used, and now the first three will be used. The characteristic analysis is as follows:
Cast Iron Cylinder: Advantages - Smooth, smooth, luster, anti-fouling, easy to clean, long life; Disadvantages - the highest price, hardness and insulation is less than the acrylic cylinder, color and shape are limited by the process is relatively simple. Supervision tips: pay attention to the glaze finish and flatness, pay attention to small cracks and defects, do not buy those who have orange peel on the surface of the cast iron tank, the better cast iron tank brand Kohler, TOTO, Le and so on.
Steel plate cylinder: Advantages - cheaper, lighter weight than cast iron, easy to transport and install. Disadvantages --- The depth of the steel bathtub is shallow, the shape is monotonous, and the insulation effect is not very good. In addition, if the thickness of the steel plate cylinder is too thin, the bathtub will be easily deformed by force during transportation, installation and use, and severe flashing may occur. Supervision tips: Once the metal bathtub has a violent glaze, it will get rusty and it will not work properly. Better brands of steel cylinders include Kohler, TOTO, and Lejia.
Acrylic Bathtub: Advantages - Cheaper prices, good insulation. The back of the bathtub is a glass fiber reinforced layer, so the hardness is high. Acrylic cylinders of good quality can maintain a bright appearance for a long time and have a service life of more than 10 years. Disadvantages --- Be careful during the construction process. Hard objects and sharp objects should not collide directly with the bathtub and cause damage. Supervision tips: Pay attention to the smooth surface of the bathtub, no obvious bumps. Well-known acrylic bathtub brands include Hecheng.
What is a molded door: a molded door panel is wood that is taken from an artificial forest, peeled, sliced, sieved, ground into dry fiber, mixed with phenolic glue as a binder and paraffin, and molded under high temperature and high pressure. A high density fiberboard with a foot line pattern.
advantage:
1. Green environmental protection: Phenolic resin is used as a binder in the production process of molded door panels. It does not contain free formaldehyde that is harmful to the human body and provides a safe guarantee for the living environment and human health.
2. Stable quality: Compared with natural wood, the molded door panel has the characteristics of tight texture, no cracking, no deformation, and the ability to prevent expansion, contraction and warpage.
3. Various functions: The doors can be divided into single doors, glass doors, louvered doors, sliding doors, folding doors, split doors and double doors. In addition, different levels of anti-theft, fireproof doors and soundproof doors can also be produced according to national standards.
4, the effect is significant: the door surface with a delicate, natural wood texture, whether painted with oil or table paint, wood texture is still clear, full of woody feeling.
Bathtub Nature Flooring Door Price Glass Home Toilet Paint Plaster Ceiling Ceiling Door Door Glass Glass Door Glass Sliding Door Shutter Door
Electric Ball Valve is operated by electric actuator, the actuator has open close type and regulating type, power 24VDC, 220VAC. valve have different type and material for optional, socket welding and flanged type, PVC, CPVC, PVDF, PP, PPH, EPDM, PTFE lined. standard following DIN, ANSI, JIS, pressure rate of PN10, PN16, 150LB, 10K. size from 1/2" to 12", limited switch, solenoid valve are optional.
Ningbo RMI Plastic Co.,Ltd offer electric Ball Valve with specification:
Size:DN15~DN300 (1/2 inch ~ 12 inch)
Connection: Flange DIN PN10, ANSI CL150, JIS10K; socket DIN, ANSI, JIS, CNS, BS; Thread BSPT, NPT.
Body Material: PVDF,PVC,CPVC,PP,PPH,PTFE lined WCB
Seal material: EPDM;FPM;FKM;VITON
Seat Material: PTFE
Design pressure:1.0Mpa(PN10 bar)
Actuator:Electrical
Operating type:Open/Shut, Regulating
Power supply:DC24V;AC220V;AC380V
Electric Ball Valve
Electric Ball Valve,Ball Valve Electric,Electric Control Ball Valve,Electric Valve
Ningbo RMI Plastic Co., Ltd. , http://www.rmiplast.com