The changes in the base metal stocks on the London Metal Exchange on November 25 were as follows:
Copper inventories were reduced by 175 tons and the total stock was 70,350 tons.
Aluminum inventories increased by 1,175 tons, with a total stock of 621,700 tons.
Zinc stocks decreased by 1,575 tons and the total stock was 445,700 tons.
Tin inventory decreased by 35 tons and the total stock was 12,845 tons.
Lead inventory decreased by 175 tons, with a total stock of 43,425 tons.
Nickel inventory increased by 390 tons, with a total stock of 22,182 tons.
Inventories of aluminum alloys increased by 120 tons, with a total inventory of 55,660 tons.
1.cylindrical milling cutter
Used for processing flat surfaces on horizontal milling machines. Cutter teeth are distributed on the circumference of the milling cutter, and are divided into straight teeth and spiral teeth according to tooth shape. According to the number of teeth and coarse teeth and two kinds of fine teeth. The helical tooth rough tooth milling cutter has fewer teeth, high tooth strength and large chip space, which is suitable for rough machining. Fine-tooth milling cutters are suitable for finishing.
2. face milling cutter
Also known as disc milling cutter, used for vertical milling machine, end milling machine or gantry milling machine processing plane, end face and circumference have cutter teeth, also have coarse teeth and fine teeth. The structure has three kinds: integral type, insert type and transferable type.
3. End milling cutter
Used for processing grooves and step surface, knife teeth in the circumference and end face, can not work along the axial feed. When the end mill has end teeth through the center, axial feed can be provided.
4. Three-side edge milling cutter
Used for processing all kinds of grooves and steps, its two sides and circumference are provided with cutter teeth.
5. Angle milling cutter
For milling grooves at a certain Angle, there are two kinds of single Angle and double Angle milling cutters.
6.Saw Blade milling cutter
Used for machining deep grooves and cutting off workpieces, there are more cutter teeth on the circumference. In order to reduce the friction during milling, there are 15 '~1° auxiliary Angle on both sides of the cutter teeth. In addition, there are keyway milling cutters, dovetail slot milling cutters, T - shaped slot milling cutters and various forms of milling cutters.
End Mill,Roughing End Mill,Carbide Square Drill Bit,Coating Machine Tools
Behappy Crafts (suzhou)Co.,Ltd , https://www.haoyuebehappy.com