At present, in the production of large non-ferrous metal ball presses , the press rolls are mounted on high-efficiency, small-volume, self-aligning spherical ball bearings. When a wide press roll is used, the movable press roll can be freely adjusted with the unevenness of the feed and the thickness (how much) of the feed. In order to ensure that the ball press works safely, it is important to choose the right bearing. The most important considerations include bearing design and sealing, cooling and lubrication. The force and distribution of the bearings in the bearing housing must be optimal, which requires accurate calculations. If required, the cooling system will ensure that the bearings work at low temperatures and improve lubrication. The low temperature operation of the grease also ensures good sealing performance of the bearings in the bearing housing. Bearings with higher loads and low speeds require special greases and certain additives. Shuguang Machinery recommends that users correctly understand the transmission mode of non-ferrous metal ball presses, which will bring convenience to your future use.
The transmission mode of the non-ferrous metal ball press basically has the following four transmission modes:
(1) Improved type: the suspension gear is changed into a gear box, which increases the transmission torque and increases the production volume. The price is much lower than that of the dual output shaft, which has been gradually promoted in China.
(2) The motor drives the reducer, and the low-speed output shaft of the reducer is a single shaft. The coupling moves the pair of large gears on the pressure roller shaft to move relative to each other, that is, the suspension gear.
(3) Open type transmission mode: that is, the motor directly drives several gears of open gear transmission, which is limited to small test or extremely low production use, and has been gradually eliminated in the domestic market.
(4) The pressure ball machine motor drives the hard tooth surface reducer, and the low speed output of the reducer is parallel to the two axes. The gear roller drives the ball roller to operate relatively. The feeding method of the ball press machine adopts the screw propulsion and exhaust device. For dry powder molding, it is a dry powder pressure ball machine.
Do you understand the above knowledge? If you are interested in the Twilight Non-Ferrous Metal Ball Press , please contact our Twilight Machinery. Our sincere service makes you satisfied!
Hotline 15038108668 Manager Cai website: http://
Dryer equipment network http://
Cement flue machine equipment network http://
Sprockets:
Sprockets is one of the most widely used and welcome products in the
market. High quality material selection.powerful and precise
heat-treatment ability and excellent assembly methods ensure Borine'
Sprockets meet strong and high efficiency needs of modern society.
Borine has products completely conforming to the international
standard(ISO) and other advanced industrial standard(DIN.ANSI)and
in-plant standard products specially developed for customers. Borine'
sprockets are all by inspected strictly before shipping to customers.
Drive Sprocket, Idler Sprocket, Chain Sprocket
NINGBO BORINE MACHINERY CO.,LTD , https://www.borine-agroparts.com