China National Petroleum Corporation issued a press release on October 12 stating that on the 8th of this month, its Jilin Petrochemical 1.6 million-ton/year diesel hydrogenation unit was formally put into production. As a result, the refinery’s three-standard high-quality diesel production capacity was from the original 1.2 million. Ton/year increased to 2.8 million tons/year.
Jilin Petrochemical Co., Ltd. has a total of 6 sets of main equipment for the 10 million-ton oil refinery expansion project, and a 1.6 million-ton/year diesel hydrogenation unit was completed on September 10. It is the third set of equipment for the project to be completed and put into production; the total investment is 310 million yuan in 2009. 4 After the start of construction, Jilin Petrochemical has the capability of large-scale production of refined diesel.
Jilin Petrochemical's 10 million-ton refinery expansion project was fully launched on March 20, 2009 and is expected to be completed and put into operation in 2010; the total investment of the project is 2.551 billion yuan, including 6 million tons/year of atmospheric and vacuum distillation and 1.4 million tons/year of catalytic cracking. , 600,000 tons/year gas fractionation, 1.6 million tons/year diesel hydrogenation, 1.2 million tons/year gasoline hydrogenation, and 20,000 tons/year* yellow recycling 6 subprojects.
Jilin Petrochemical Co., Ltd. has a total of 6 sets of main equipment for the 10 million-ton oil refinery expansion project, and a 1.6 million-ton/year diesel hydrogenation unit was completed on September 10. It is the third set of equipment for the project to be completed and put into production; the total investment is 310 million yuan in 2009. 4 After the start of construction, Jilin Petrochemical has the capability of large-scale production of refined diesel.
Jilin Petrochemical's 10 million-ton refinery expansion project was fully launched on March 20, 2009 and is expected to be completed and put into operation in 2010; the total investment of the project is 2.551 billion yuan, including 6 million tons/year of atmospheric and vacuum distillation and 1.4 million tons/year of catalytic cracking. , 600,000 tons/year gas fractionation, 1.6 million tons/year diesel hydrogenation, 1.2 million tons/year gasoline hydrogenation, and 20,000 tons/year* yellow recycling 6 subprojects.
3014 SMD IR LED supplier from China.
3014 SMD IR LED is used in LED infrared light guide plate and LED infrared backlight screen because of the small size of the product.
We produce and sell 3014 SMD IR LED, which is with the wavelength from 680nm-1550nm. In this category, we mainly introduce the two kinds of wavelengths: 940nm IR LED and 850nm IR LED. These two wavelengths are the most commonly used wavelengths in infrared monitoring. They all can be used to monitor products.
940nm infrared LEDs are totally invisible to the naked eye, which means you can't see whether the 940nm working or not. Unless you watch it through some device(like phone's camera), which will show some purple or white color light.
The 850nm infrared LEDs have a very slight reddish when it's working, which means you can see if the 850nm LED is working.
Under the same power, radiation intensity of 850nm will be higher than the 940nm. Of course, 940nm also has its own unique advantages. It is the naked eye that is indistinguishable from work or from work, therefore, its application has been widely used in many special markets in the modern era.
We supply the 3014 940nm SMD IR LED and 3014 850nm SMD IR LED products with difference power, such as: 0.1W 940nm, 0.2w 940nm, 0.3w 940nm, 0.4w 940nm, 0.1W 850nm, 0.2w 850nm, 0.3w 850nm, 0.4w 850nm and so on.
3014 SMD IR LED,SMD IR LED, 3014 IR LED, 3014 SMD LED
Shenzhen Best LED Opto-electronic Co.,Ltd / BESTSMD CO LIMITED(HK) , https://www.bestsmd.com