Infusion pumps for infusion systems in the medical field is very important, can be described as "a good player in medical equipment." However, many users in the process of using, often occurs infusion pump alarm display failure, so what is the cause, the specific treatment is what? This small series for your interpretation of the infusion pump common failure and treatment. Where to buy high-quality infusion pump? Infusion pump common alarm display: 1, bubble alarm Failure reasons: air bubbles in the pipeline, the solution bottle or bag of liquid is empty; Treatment: Open the warehouse door remove the pump tube, discharge bubbles, replace the new infusion bottle; 2, low battery Voltage alarm Fault reasons: battery / battery power shortage, the battery charge is invalid; Treatment: link AC power, replace the same type of battery; 3, the number of drops Alarm Fault reason: infusion bottle or bag liquid is empty, the flow rate regulator is not open, Exhaust when the cap is not open, the sensor placed wrong, the sensor damage, drip instability, swinging, drip pot mist, drip pot liquid is too high; Treatment: replacement of new infusion, open the flow regulator, open the exhaust Cap, correctly place and clamp the sensor to the drip pot, change the sensor, fix the drip pot, keep stable, shake the drip pot and remove the water fog, the drip pot can not exceed the height of the drip pot 1/2, And then part of the liquid squeezed back into the bottle, so that the liquid level down; 4, to maintain the open rate Failure reasons: infusion bottle or bag liquid is empty; Treatment: change the infusion or stop Fluid; 5, pressure, blockage alarm Failure reasons: the flow regulator (screw clamp) is not loosening, the infusion tube discount or pressure; clot vein blockage, near the heart vascular pressure is too large; Treatment: Loose flow regulator (Spiral clamp) to lift the discounted or pressurized infusion, remove the clot, release the tourniquet, wear wide cuffs to avoid blood pressure limbs side of infusion; Further reading: Pump and Valve Tube and Tube Fittings Exhibition 2016 Exhibition Information Industry Internet (Xiamen ) Technology Co., Ltd. Asia Pump Network Editor: Fen Fen (QQ / Wechat:) (Service Hotline:)
Gate Valve,Flanged Gate Valve,Threaded Gate Valve,Stainless Steel Gate Valve
Wenzhou Dico Valve Technology Co.,Ltd. , https://www.dicovalves.com