The solid wood floor feels warm and environmentally friendly, and the paving at home can show a good quality of life. At present, the solid wood flooring products on the market are mixed, and some unscrupulous merchants are shoddy for profit. So how do you identify inferior wooden floors?
The two-color board is made of the raw material of the sapwood and the core material, and then the coloring is used for special coloring treatment to eliminate the color difference between the sapwood and the core material, so as to impersonate the consumer by posing as a high-quality solid wood floor. Since the air dry density, water content, and wood hardness of the sapwood and the core material are different, it is easy to cause quality problems such as arching, deformation, and cracking of the floor.
Identification method: sanding the floor surface with sandpaper, or looking at the cross section after sawing the floor, the two-color board will obviously show excellent difference.
The adapter plate is formed by bonding a large number of tailings and lower wires. This type of floor is not only uneven in stress, easy to deform, crack, and has a high formaldehyde content.
Identification method: a piece of the floor is sawn or polished longitudinally, and the obvious stitching is the adapter plate.
The veneer is attached to the inferior substrate with a solid wood veneer of 0.05mm-2mm thickness to serve as a quality wood floor. Such flooring is liable to cause the veneer to peel off from the substrate and is not environmentally friendly.
Identification method: Comparing the texture of the floor surface and the bottom surface, the wood grain on both sides of the high-quality solid wood floor is basically the same, and the veneer is completely different.
Layout Tools In Carpentry,Layout Measuring Tools,Layout Calipers,Layout Protractor
Ningbo Hoya Electronic Commerce Co., LTD , https://www.jauhitools.com