[
Huaqiang Security Network News ]
Some friends asked me how to do the reversing image. I also read the answers from other places. I hope that I can help you. Here is a brief explanation of how the reversing image is not clear.
1. The reversing camera has water mist or mud. Sometimes the camera will be covered with water mist or mud, which will blur the image and wipe it clean.
2, reversing camera grinding. Irreversible failure, can not be repaired, can only replace the camera. The surface of most cameras is still very fragile, so it is best to put a protective film on the outside of the camera.
3. The quality of the reversing camera is too small. The problem with the accessories, the camera imaging effect is not good, replace the camera with a good point.
Possible reasons why the reversing image is not displayed:
1, the display settings. There are still many such problems. Generally, there is a camera switch control in the display settings, and the switch is turned "ON".
2. The camera is faulty. Replace the reversing camera.
3. Line problems. A problem with the highest failure rate. Because the wiring harness of the reversing image is pulled from the instrument panel to the trunk, the wiring is long, and it is likely that the wiring harness or the plug at a certain location is not in good contact, and it needs to be carefully checked.
The reversing image does not show the vehicle that is installed after the reversing image. It is mainly a product problem and a construction problem. In order to avoid hidden dangers, the owner who wants to install the reversing image must purchase a good product and find a professional. The repair station is operating, otherwise if there is a problem with the actual line, it is still very troublesome to check.
Stainless Steel Flange
A flange can also be a plate or ring to form
a rim at the end of a pipe when fastened to the pipe. A blind flange is a plate
for covering or closing the end of a pipe. A flange joint is a connection of
pipes, where the connecting pieces have flanges by which the parts are bolted
together.
Although the word flange generally refers to
the actual raised rim or lip of a fitting, many flanged plumbing fittings are
themselves known as 'flanges':
There are many
different flange standards to be found worldwide. To allow easy functionality
and interchangeability, these are designed to have standardised dimensions.
Common world standards include ASA/ASME (USA), PN/DIN (European), BS10
(British/Australian), and JIS/KS (Japanese/Korean). In the USA, ANSI stopped
publishing B16.5 in 1996, and the standard is ASME B16.5
Stainless Steel Flange,Machining Stainless Steel Flange, Stainless Steel Pipe Fitting Flange,Galvanized Stainless Steel Flange
Yixing Steel Pole International Trading Co., Ltd , https://www.yx-steelpole.com
