The main materials for the decoration of wood are blockboard, integrated board, particleboard, density board, veneer, etc. What are their uses in home furnishings?
>>>Recommendation: Man-made plate types
Blockboard: good moisture-proof effect Blockboard is made by sticking natural wood strips on the middle and sticking very thin veneer on both sides. It is the most important material in the decoration. It can be used for furniture and wooden doors, door covers, and heating covers. , Curtain boxes, etc., waterproof performance is better. When selecting, it should be noted that the internal wood should not be broken. Blockboard plywood is usually attached to the surface of the blockboard. Wooden furniture such as furniture made by it must go through two processes of using glue board and paint, so the cost is higher.
Integrated board: not easily deformed This material is made of deep-processed large-diameter logs and interleaved and spliced ​​like fingers. Its superior environmental performance, low formaldehyde content is not easily deformed.
MDF and particle board: Each has its own advantages and disadvantages. Particleboard is a board made by pressing natural wood into granules. The medium density board is formed by pressing wood chips and has good flatness but poor moisture resistance. In contrast, the MDF's holding power is worse than that of the chipboard. If the screw is tightened, it will be difficult to fix it.
Facing multilayer board: easy and cheap multi-layer board, different layers are called differently, commonly used for plywood, its advantages and disadvantages mainly depends on raw materials. At present, the main use in home improvement is a decorative plywood, that is, a very thin solid wood veneer has been attached to the plywood in the factory. The decorative plywood is easy to use and the price is cheap. >>>Recommendation: Knowledge about artificial board core board
Plate purchase home improvement furniture decoration Daquan door price heating
Diamond Segment,Diamond Saw Blade,Diamond Wire Saw Co., Ltd. , http://www.nsblades.com