At present, in home renovations, water pipes, wires, telephone lines, cable TV lines, etc. are generally not buried under the floor, they are buried in walls, covered with cement, and then surface decoration. This totally closed way has brought great obstacles to the maintenance of pipelines in the future. First of all, it is required to retain the complete drawing of the pipeline, otherwise it is impossible to start. Secondly, repair and replacement must completely destroy the surface decoration, which not only takes time and effort but also causes waste of materials. If the floor or wall is covered with special materials, such as marble, precious wood, etc., it is almost impossible to reconfigure the same.
How to change the laying method of this pipeline now, experts recommend the following methods:
1. The pipeline is grooved and walked along the foot of the wall. After laying and rowing, it is not closed with cement. It is nailed directly to the skirting board. In the future maintenance, it is sufficient to tear the skirting board. At present, the pvc baseboard on the market is generally less than ten yuan per meter, and the loss is not great. In this way, because pipelines have to go at right angles, waste of pipeline materials is more cost-effective than knocking out expensive floors and marbles in the future.
2. If you are decorating a villa or an old apartment house, you may wish to keep the traditional mirror line. The pipeline is buried under the mirror line and maintenance is more convenient.
3. As far as possible, the kitchen and toilet pipes are to be walked in the ceiling, and the vertical pipes are best closed with a removable moisture-proof plate or a stainless steel cabinet.
Water and electricity renovation Marble cement TV decoration home decoration house decoration cabinet kitchen cabinet door bathroom ceiling material bathroom ceiling villa map villa drawing apartment decoration
Brass knurled thread insert Made of material, good thermal conductivity and heat resistance.
Widely Used On the Injection molding for Tightly Fixing.
Can be installed by ultrasonic or heat into thread tapered hole, or molded in during injection.
China leading manufacturers and suppliers of Hex Nut,Hexagonal Nut, and we are specialize in Stainless Steel Nuts,Hex Nut Bolt, etc.
Brass hex nut,hex coupling nut,hex flange nut,hex thin nut,hex bolts and nut
Shenzhen Lanejoy Technology Co.,LTD , https://www.szbrassnuts.com