Float glass prices fall in the second half or fall

In recent years, float glass has been unsalable throughout the country, and prices have dropped significantly. In this regard, the industry believes that due to overcapacity of float glass and rigid demand is difficult to ease in the short term, the second half of the industry boom will enter a downward cycle.

It is reported that in the near future, Shahe in Hebei Province reduced the total number of float glass by 6 yuan/weight, Hunan and Hubei lowered 4 yuan/weight, Zhangjiagang, Jiangsu lowered 4 yuan/weight, Anhui Province lowered 3 yuan/weight, Shandong Giant The discount rate is 2-3 yuan/weight box. At the same time, the glass manufacturers are light and stocks are high.

In fact, the reporter learned that the downward trend in plate glass prices has become apparent since May. By the end of June, the glass price index was 77.3, down 8.7% year-on-year, and down 9.7% month-on-month.

According to industry insiders, due to the rapid expansion of flat glass production capacity, the price of glass products has significantly decreased after entering May. As the overcapacity is hard to ease in the short term, the industry boom in the second half of the year will enter a decline cycle.

However, people in the industry also pointed out that the current price of glass-related upstream raw materials such as soda ash and heavy oil has shown a slight upward trend. Some glass manufacturers have already reached their current prices with low prices. There is no profit at all, and they are supported by rising costs. There is little room for future glass prices to fall.

According to statistics from related agencies, as of late June, the price of heavy oil in North China was 4,350 yuan/ton, up by 24.3% year-on-year and 2.2% month-on-month. Soda ash prices fell slightly after continuous rise, and the price of high-end heavy soda ash in East China was 2,100 yuan/ton. It increased by 50% year-on-year, and remained unchanged month-on-month. Light soda ash reached 2,200 yuan per ton, a year-on-year decrease of 6.7%. The phenomenon of heavier and lighter prices was continuously eliminated.

Analysts bluntly pointed out that the current glass market concentration is still low, a large number of new production capacity is ongoing, taking into account the total production capacity after the elimination of backward production capacity at the end of 2011 increased to 94 million weight boxes, corporate profitability has been a huge test.

CBN Cutting Discs

CBN abrasive is mainly used for steel parts, such as high speed steel, die steel, 45 steel, etc., can be made into electroplating CBN, resin CBN, sintered CBN. Can be made into grinding wheel, cutting pieces, grinding head. Abrasive sharp, high temperature resistance, good thermal stability, wear resistance. The hardness of CBN is higher than that of ordinary abrasives and the ability to maintain shape is one of the main characteristics of high performance abrasives. CBN is very resistant to pressure. CBN has good thermal conductivity and can achieve cold cutting during grinding.

strong wear resistance, long life

The grinding ratio of CBN wheel can reach 3500-5500, which is 100 times higher than that of ordinary corundum wheel and 3-5 times higher than that of diamond wheel.

environmental protection, no pollution, energy saving and consumption reduction

No too much powder dust.

High work efficiency and good comprehensive economic benefits

The grinding is sharp, the grinding force is small, the dressing cycle of CBN wheel is long, the dressing amount is less, and the replacement time is long. Long service cycle, high grinding ratio, can obtain better economy, good shape retention in use, do not need to change and trim grinding wheel often, save working hours, improve working conditions, is conducive to machining operation.

Cubic boron nitride is not suitable for grinding hard metals and non-metallic materials. At high grinding temperature, CBN will react with alkaline aqueous solution. CBN grinding wheel will decompose in alkaline solution at 300℃, and can decompose in trace amount in boiling water, which will destroy the crystal shape of grinding grains. Therefore, oily coolant should be used instead of water-based coolant during grinding.



Cbn Cutting Discs,Flap Disc,Grinding Disc,Cbn Cutting Blade

Henan Kemei Abrasives Co.,LTD , https://www.grindingwheelsmanufacturer.com