Fluke Fluoride Centrifugal pumps may be more unfamiliar than other centrifugal pumps, but Fluorine Centrifugal Pumps can not substitute for other centrifugal pumps in our chemical production. When the Fluorine centrifugal pump fails during use, it may be more difficult to troubleshoot than other centrifugal pumps. Next, we will bring lined fluorine centrifugal pump failure analysis and solution introduction. 1, lined plastic fluorine centrifugal pump discharge after the interruption (1) suction pipe leakage: check the suction side of the pipe connection and stuffing box seal. (2) Suction side of the pump when the gas is not discharged End: Requires re-irrigation pump. (3) Suction side suddenly blocked by foreign body: stop pump to deal with foreign body. (4) Inhalation of a large amount of gas: check the vortex inlet vortex, submerged depth is too shallow. 2, fluorine plastic centrifugal pump is not drained (1) insufficient pump: re-irrigation pump. (2) lined plastic fluorine centrifugal pump is not right: check the direction of rotation. (3) fluorine plastic centrifugal pump speed is too low: check the speed, increase speed. (4) filter plug, the valve is not working: check the filter to eliminate debris. 3, fluorine plastic centrifugal pump can not start or start the load (1) the original motive or power is not normal: check the power and the original motivation. (2) Fluorine plastic centrifugal pump stuck: Hand wheel coupling inspection, disintegration inspection if necessary, to eliminate static and dynamic part of the fault. (3) packing pressed too tight: relax packing. (4) Discharge valve not closed: Close the discharge valve and restart. Through the introduction of fluorine-lined centrifugal pump, I believe everyone lined fluoridation pump failure and solutions have a more profound understanding of the rapid development of China's chemical industry, fluorine-lined centrifugal pump demand will certainly be further strengthened, how Fluoride centrifugal pump to speed up all aspects of the promotion, but also need the help and support of all walks of life. This article is copyrighted industry interconnect (Xiamen) Co., Ltd. All are welcome to reprint, please indicate the source and author of: Asian pumps Network (CEO QQ / micro letter: 18,189,528) Editor: Coco (QQ / micro-channel: 97,129,096) starting: http : //beng.liuti.cn/ (Service Hotline:)
Stainless Steel Precision Turned Parts
Precision turning parts
Precise accessory is a kind of high-precision hardware turning part processed by lathe and other machine tools, which is characterized by high precision, precision and small size
It is a very common product in our hardware processing parts industry and is widely used. The basic precision can reach 0.01mm-0.1mm. The products include steel, aluminum alloy, brass, environment-friendly iron, stainless steel and other precision CNC machining lathe parts of different sizes and shapes
Advantages of precision turning parts:
High technical requirements, beautiful appearance and good product quality
Scope of application:
Mechanical equipment, computers, mobile phones, electrical appliances, fans, cameras, high-end electronics, toys, instruments, automobiles, new energy, optical fiber communications, photographic stage equipment and other products.
Stainless Steel Precision Turned Parts,Cnc Turned Components,Turned Components,Cnc Precision Turning Parts
Stand Dragon Industrial Co., Ltd. , https://www.standdragontw.com