1. The main requirements for mechanical performance are as follows:
1 Abrasion resistance: What vehicles will the floor use when it is used?
2 Pressure resistance: How much load will the floor bear during use?
3 impact resistance: whether the impact will cause the ground surface peeling?
2. The chemical performance requirements mainly consider the following two aspects:
1 Acid and alkali resistance: The type and concentration of corrosive chemicals used during use.
2 solvent resistance: the type of solvent used and the contact time.
3. Floor position status Based on whether the floor is on the ground floor or on the ground floor, is it necessary to determine whether moisture treatment or special moisture-proof floor is required?
4. Base condition 1 base strength: General requirements compressive strength ≥ 20Mpa
2 Flatness: Does it need to be repaired with epoxy mortar?
5. Aesthetic requirements 1 Color requirements: Does it require color division?
2 brightness requirements: is to choose matte or light?
3 Flatness requirements: Is there a requirement for the flatness of the floor?
6. Fire protection and anti-static In some occasions, there is a need for floors.
7. The cost budget chooses the appropriate floor type and thickness according to the budget.
8. Safety requirements If the floor is in an oily environment or on a ramp, you need to choose a non-slip floor.
The main product related to abrasives is the abrasive belt cleaning block
Main features
1. For maximum protection in any shop
2. Removes accumulated particles
3. Increases the lifetime of sanding belts and discs up to 500%
Our abrasive cleaner sticks are the easiest solution for cleaning/unloading abrasives. Increase the life of new sanding belts and discs up to 10 times as long with our quality abrasive belt cleaners. Simply press the cleaner stick lightly against moving sanding belts and discs to remove clogged-up pitch and saw dust. Improves the finish quality and prevents burns and marking. Cuts down the frequency and costs of belt replacement.
Remove gum buildup on your sanding discs and belt sanders with this amazing Sanding Belt cleaner. The sanding belt cleaner instantly cleans sanding belts of all grits and removes the accumulated particles that lodge between the abrasive grains and cause a dull cut. Increase the life of sanding belts and discs up to 500% with this sanding belt cleaner
We distributes and wholesales various brands of Abrasive Sanding Disc, Cutting Wheels , Abrasive Flap Disc , Flap Wheels , Flap Disc Backing Pad, Flap Disc Adhesive , Abrasive Machine and Surface Conditioning Product etc, and enjoy a high position among consumers.
Product Description
This crepe-rubber belt cleaner quickly removes gum and grit from belts and discs without damage. Just press the cleaning block against your sanding belt or disc until it is clean. That is all there is to it. Extend the life of your belts or discs with this innovative natural cleaner.
Clean sanding belts and discs for optimal performance
Abrasive belt & disc cleaner removes residue to unclog loaded sanding belts or discs. The easy-to-use cleaner comes in handy on the job site or at home for anyone from professionals to do-it--yourself, and using the cleaner will extend the life of the sandpaper and orbital machine or belt sander - whichever you use. Run the abrasive cleaning stick across the belt or disc to remove unwanted gunk and make a smooth surface for optimal performance.
Expand the life of your belt sander, orbital machine and sandpaper with the Abrasive belt & disc cleaner. It removes residue to keep it from clogging sanding belts and discs.
1. remove residue on sanding belts and discs with Abrasive belt & disc cleaner
2. abrasive cleaning stick
From the Manufacturer
The abrasive belt & disc cleaner is for all-purpose, wet or dry sanding. The flexible rubber construction works better.
Rubber Cleaning Block,sanding disc rubber cleanning,Abrasive Cleaning Block,Abrasive Paper,Abrasive Related Products
Zhengzhou Jiading Abrasive Manufacturing Co.,Ltd , https://www.abrasive-jd.com