Cutting Depth 10-60mm Wall Grooving Machine

      It is a new type water and electricity installment automatic grooving machine with fast speed and one time forming,also it's an ideal grooving tool to change open wire to concealed wire for old house,decorate new house and telephone wires.
New design advantages:
1,Able to open blind corner,never card knife
2,Bearing is updated to NSK fine steel.
3,Import IC never burn machine, easy to cut all kinds material
4,Made in China butter change to import butter,improve gear damage condition



Main features and properties:
1. Wide application: applicable to walls of different materials, such as solid brick, sand brick, hollow brick, air-added brick, cement-covered wall and wall column;
2. Easy for operation: it is simple to operate it. One can operate it easily; it is convenient to move it; during break in the midway, it is only necessary to turn off the power; it is unnecessary to dismantle the body which can still be suspended on the wall safely, without falling. It saves labor.
3. One-time shaping: fast and automatic grooving can shape in one time, without the need of any auxiliary tool and secondary process; the grooving depth can be controlled at will.
4. Rotate freely: it can be adjusted from different angles; the shape is beautiful; rotating grooving is available for 45°, 180° and 360°. It can be applied freely.
5. High efficiency: grooving is completed in one step; compared with traditional grooving mode, the efficiency ratio is 50:1; it greatly reduces construction cost such as manpower and time.
6. Wear-resisting tool: hard high-alloy tool bit can be used for more than 40 times; the cutting cost is only 1-3 cents/m; it is simple to dismantle it.
7. Healthy and environmentally-friendly: the dust cut by the main machine is particle-shaped; it will raise dust at a slow-speed of revolution. During grooving, the dust is little, which reduces pollution. Besides, it is equipped with auxiliary machine of industrial dust remover to remove noise and decrease hard to constructors caused by dust to the largest extent. It fully shows humanistic concern.
8. Easy to use: the structure is simple and practical. It can be dismantled, polished and repaired by non-professional personnel.
9. Eye protectors and auxiliary tools are equipped with the machine. The whole machine can be easily carried by a motorcycle.
10. Anti-locking press button is suitable for body mechanics structure.
11. Depth adjustment guide pulley can adjust the depth at will.


parameter:

Purchase mode:
1.Main machine: CGKC series 
2,Auxiliary machine: thickened stainless-steel barrel(30l) dust collector, water supply tank set
3,Accessories:106mm blade one box, 127mm blade one box,dedicated single-end tool for light brick, double-end tool

Our company in dry powder, mortar, putty powder, really stone paint, insulation mortar, coating and other complete sets of engineering equipment design, installation and debugging, provide reasonable solution, and focused on the investment scale of each customer, plant conditions, material type, logistics transportation condition, and different conditions and requirements, such as product formula, design a set of perfect and suitable for user's complete sets of equipment production line.
More question, please contact me by following ways in time.
Sales Manager : Betty Chen
 
Tel: +86-371-56053450  Fax:  +86-371-86253575
Mobile(WhatsApp,viber): +86 18135773702
 
Website: http://www.shotcretemanufacturer.com       It is a new type water and electricity installment automatic grooving machine with fast speed and one time forming,also it's an ideal grooving tool to change open wire to concealed wire for old house,decorate new house and telephone wires.
New design advantages:
1,Able to open blind corner,never card knife
2,Bearing is updated to NSK fine steel.
3,Import IC never burn machine, easy to cut all kinds material
4,Made in China butter change to import butter,improve gear damage condition



Main features and properties:
1. Wide application: applicable to walls of different materials, such as solid brick, sand brick, hollow brick, air-added brick, cement-covered wall and wall column;
2. Easy for operation: it is simple to operate it. One can operate it easily; it is convenient to move it; during break in the midway, it is only necessary to turn off the power; it is unnecessary to dismantle the body which can still be suspended on the wall safely, without falling. It saves labor.
3. One-time shaping: fast and automatic grooving can shape in one time, without the need of any auxiliary tool and secondary process; the grooving depth can be controlled at will.
4. Rotate freely: it can be adjusted from different angles; the shape is beautiful; rotating grooving is available for 45°, 180° and 360°. It can be applied freely.
5. High efficiency: grooving is completed in one step; compared with traditional grooving mode, the efficiency ratio is 50:1; it greatly reduces construction cost such as manpower and time.
6. Wear-resisting tool: hard high-alloy tool bit can be used for more than 40 times; the cutting cost is only 1-3 cents/m; it is simple to dismantle it.
7. Healthy and environmentally-friendly: the dust cut by the main machine is particle-shaped; it will raise dust at a slow-speed of revolution. During grooving, the dust is little, which reduces pollution. Besides, it is equipped with auxiliary machine of industrial dust remover to remove noise and decrease hard to constructors caused by dust to the largest extent. It fully shows humanistic concern.
8. Easy to use: the structure is simple and practical. It can be dismantled, polished and repaired by non-professional personnel.
9. Eye protectors and auxiliary tools are equipped with the machine. The whole machine can be easily carried by a motorcycle.
10. Anti-locking press button is suitable for body mechanics structure.
11. Depth adjustment guide pulley can adjust the depth at will.


parameter:

Purchase mode:
1.Main machine: CGKC series 
2,Auxiliary machine: thickened stainless-steel barrel(30l) dust collector, water supply tank set
3,Accessories:106mm blade one box, 127mm blade one box,dedicated single-end tool for light brick, double-end tool

Our company in dry powder, mortar, putty powder, really stone paint, insulation mortar, coating and other complete sets of engineering equipment design, installation and debugging, provide reasonable solution, and focused on the investment scale of each customer, plant conditions, material type, logistics transportation condition, and different conditions and requirements, such as product formula, design a set of perfect and suitable for user's complete sets of equipment production line.
More question, please contact me by following ways in time.
Sales Manager : Betty Chen
 
Tel: +86-371-56053450  Fax:  +86-371-86253575
Mobile(WhatsApp,viber): +86 18135773702
 
Website: http://www.shotcretemanufacturer.com

Pipe Fitting mainly used for pipes' connection which widely applied to petroleum and gas pipeline, chemical, power plant, and shipbuilding industries. The products include elbow, tee, reducer and cap

Butt Welded Pipe Fitting

Material: Carbon Steel & Alloy Steel&Aluminum Steel
Standard: ASME Standard, ASTM Standard, JIS Standard, DIN Standard, EN Standard, MSS Standard, NACE Standard
Wall Thickness: ASTM Standard: SCH5s, SCH10s, SCH20, SCH30, SCH40, SCH60,SCH80, SCH100, SCH120, SCH140,SCH160, STD, XS, XXS; 

JIS & DIN Standard

Seamless Pipe Fitting Size

1/2"-24"

Welded Pipe Fitting Size

26"-100"

Butt Welded Pipe Fitting,Welded Pipe Fitting,Seamless Pipe Fitting
MATERIAL	Carbon Steel :
	ASTM A234 WPB; 20#, 10#
	DIN St37, St45.8, St52.4,St.35.8,St.35.8.
	Stainless Steel:
	304  304L  316  316L
	Alloy Steel:
	16Mn  St45.8  A420 WPL6, A234 WP5, WP9, WP91, WP92, WP11, WP22, etc
	ASTM A860 WPHY42, WPHY46,WPHY52,WPHY60,WPHY65,WPHY70
STANDARD	ASTM / JIS / DIN / BS / GB / GOST
MODEL	1.Tee(Straight and Reducing)     2.180 DEG Return
	3.Elbow (45/90/180 Degree)          4.Cap
	5. Reducer(Concentric and Eccentric)
TYPE	Seam Or Seamless
SURFACE	Black Paint, Anti Rust Oil, Hot-Dipped Galvanize
WALL THICKNESS	SCH5S, SCH10, SCH20, SCH30, SCH40, STD,XS,SCH60,
	SCH80, SCH100, SCH120, SCH140, SCH160, XXS,
SIZE	1/2"-100"
CONNECTION	Welding
SHAPE	Equal, Reducing
APPLICATION	Petroleum, chemical, power, gas, metallurgy, shipbuilding, construction, etc
Customers' drawings or designs are available.
PACKAGE	1> 1/2" - 2" in cartons.
	2>Above 2" in wooden cases.
	Big size is workable by pallets.
DELIVERY DETAILS	According to the quantities and specifications of each order.
	Normal delivery time is from 30 to 45 days after receiving the deposit.

Pipe Fitting

Pipe Fitting,Seamless Pipe Fitting,Butt Welded Pipe Fitting,Welded Pipe Fitting

HEBEI HANMAC MACHINE CO., LTD. , http://www.chinahanmac.com