Comprehensive comparison of multi-layer solid wood flooring with solid wood flooring and laminate flooring
1. Stability: The solidity of the wood fiber has the unidirectionality of the wood fiber and the tree age of the tree core and the tree edge is different, which results in different degrees of wood density of the plate, thus causing the plate to have different thermal expansion coefficient and easy deformation, in dehydration It is easy to sew in the case. The production process of the laminate floor is to process the wood waste into powder, add glue, press it into high-density board under high temperature and high pressure, then paste the computer-printed wood grain paper, and then apply the aluminum oxide coating and wear-resistant material. Finally processed into the shape we see. The stability of the reinforced plate is better, but since the substrate is a high-density plate, it is easy to swell as a whole after being heated and damp. If the shrinkage seam left during installation is small, it is easy to arch, and the floor is afraid of water. It is easy to swell after encountering water and is not easy to handle.
Multi-layer solid wood flooring, the production process is to cut the wood into veneers, and then heat-press molding according to the wood grain criss-crossing with resin glue. Because the structure is criss-crossed, the layers are mutually restrained, thus overcoming the thermal expansion and contraction coefficient of wood by more than 85 percent, the deformation is small, and the substrate core is selected. The looser wood of the eucalyptus, the loose pores between the woods can also offset some of the stress of wood expansion and contraction. Therefore, its stability is much stronger than other floors.
2, the sense of foot: solid wood flooring and multi-layer solid wood flooring are made of solid wood, the foot feel is the same, and the feeling of the floor of the laminate is more rigid due to its different structure (let the customer step on the laminate floor with both feet and On the multi-layer solid wood floor, you can clearly feel the difference between them). It should be noted that the paint surface of the solid wood floor is a thick layer of UV paint. The human body only touches the UV paint instead of the wood itself; the paint of the multi-layer solid wood floor penetrates the wood fiber through the advanced infiltration process. Among the pores, the human body is exposed to a mixture of paint and wood. Therefore, the multi-layer solid wood flooring has the characteristics of warm winter and cool summer, which is also the performance that other flooring materials do not have. (You can let customers put their hands on the multi-layer solid wood floor and other floors, and you will immediately feel the obvious difference between them.
3, wear-resistance: the national standard for the multi-layer solid wood floor wear-resistant test standard is 500 Newtons of positive pressure under 100 turns, the wear quality is not more than 0.08 mg. The paint surface of the multi-layer solid wood floor is generally made of UV paint, and the surface is coated with a layer of porcelain powder, which is comparable to the aluminum oxide of the laminate floor. Take Bijia as an example: Bijia multi-layer solid wood flooring adopts advanced super-wear-resistant UV resin paint (American PPG) imported from abroad, and the produced flooring has good wear resistance, rub resistance, pressure resistance and scratch resistance. It is then treated with a special 9-side 2 (UV drying equipment 100% curing) special paint surface treatment to improve the overall surface quality of the paint.
4. Care and maintenance: Multi-layer solid wood flooring is as convenient as a laminate flooring, but the management of solid wood flooring is very troublesome. The most fundamental reason is because of the characteristics of their different wooden structures (see Stability one period). Solid wood floors are prone to dehydration and deformation. In the dry winter, humidifiers must be used to maintain humidity. However, in summer, the humidity is too high or it is easy to swell when exposed to water. In short, the solid wood floor is very arrogant, and a little careless during maintenance will cause problems such as squeezing, deformation and blasting. In addition, since the paint surface of the solid wood floor is rolled and lacquered, it is easy to explode after being impacted, and it is easy to make the lacquer surface grind after a long time of use (it is difficult to repair).
Solar Power Generator, Solar Generator Kits, Portable Solar Generator, Portable Power Station
Guangdong Dp Co., Ltd. , https://www.lightdp.com