"This winter should not be too short." Xiong Weiping, general manager of China Aluminum Corporation, said at the recent annual press conference. In a word, this “winter†is the plight of the electrolytic aluminum industry once again facing a full loss after three years. Xiong Weiping told reporters that the price of electrolytic aluminum began to decline after ** months of this year, and it has now slipped to 15,500 yuan/ton, and the industry has fallen into a loss situation.
As a high-energy-consuming industry, the rising prices of coal and electricity have led to an increase in the cost of electrolytic aluminum. According to Xiong Weiping, at present, the average total cost of electrolytic aluminum in the industry is around 16,500 yuan/ton, and the price is only 15,500 yuan/ton. Xiong Weiping told reporters that since September 2011, due to the international economic downturn and the impact of domestic energy and raw material prices, the aluminum industry has once again seen an inverse phenomenon that the product price is lower than the production cost, and aluminum companies have suffered large losses.
It is worth noting that, on the one hand, raw materials are subject to human beings to lead to high costs, the current foreign dependence of China's bauxite has reached 60%; the other hand, the electrolytic aluminum industry is facing an overall excess capacity, which has reduced the aluminum price upside.
It is understood that some electrolytic aluminum companies have begun to reduce production, especially since December, due to rising electricity prices and other reasons to reduce production capacity of about 630,000 tons of electrolytic aluminum. According to the statistics of Baichuan Information, the operating rate of the electrolytic aluminum enterprises in the country has dropped to 83.6%, and more than 88% of the work started before October. Analysts pointed out that although compared to the current capacity of 21.05 million tons of start-up operations, aluminum smelting enterprises have limited production, but it is still not enough to support the aluminum price, but it is expected that there will be a large-scale production reduction of such electrolytic aluminum enterprises in the later period.
Industrial sectional doors are the most durable and longest lasting doors to ensure circulation at the areas of the factory entrance and exit of goods, loading and unloading areas.
The body of sectional door is forming by 40 mm sandwich panels. These panels provides sound and heat insulation due to the intense doped polyurethane insulation was injected between galvanized steel sheet. (50 kg/m3).
Industrial sectional door systems provide space-saving with opening parallel to the ceiling.Any opening can be used clearly . and produces in accordance with the transition range and the height in the factory buildings or warehouses.
Doors is working sliding by be the most appropriate the gap between the top level of the gate with a ceiling height within the side rasils. The door can be mounted in different ways according to the gap distance (standard, low, highlift and vertical track systems).
Industrial sectional doors can easily be opened automaticly by 230-380 V-AC/50 Hz electric motor or manualy thanks to torsion spring system that balances the weight of the door.The galvanized springs are made to be durable of 25.000 door cycles.Motor with emergency chain All the drive systems have a mechanical back-up system fitted to the reduction gearbox of the electric motor, so that the sectional door can be opened if the power fails. The reduction gearbox can then be powered using the chain.
Industrial Sectional Door,Industrial Overhead Sectional Door,Industrial Warehouse Sectional Door,Industrial Garage Interior Sectional Door
Shenzhen Hongfa Automatic Door Co., Ltd. , https://www.hfhighspeeddoor.com