The opening and closing member of the wire port stop valve is a plug-shaped valve flap having a flat or tapered surface, and the valve flap moves linearly along the center line of the fluid. The movement of the valve stem, (common name: dark rod), also has a lifting rotary rod type, (common name: bright rod) cut-off valve is only suitable for full opening and full closing, no adjustment and throttling are allowed.
As a professional hydraulic control valve manufacturer, today's first valve information summary:
The opening and closing member of the wire port stop valve is a plug-shaped valve flap having a flat or tapered surface, and the valve flap moves linearly along the center line of the fluid. The movement of the valve stem, (common name: dark rod), also has a lifting rotary rod type, (common name: bright rod) cut-off valve is only suitable for full opening and full closing, no adjustment and throttling are allowed.
Stop valve advantage
(1) The structure is simpler than the gate valve, and it is convenient to manufacture and maintain.
(2) The sealing surface is not easy to be worn and scratched, and the sealing property is good. There is no relative sliding between the valve flap and the sealing surface of the valve body when opening and closing, so the wear and the scratch are not serious, the sealing performance is good, and the service life is long.
(3) When opening and closing, the valve flap stroke is small, so the height of the shut-off valve is smaller than that of the gate valve, but the structure length is longer than the gate valve.
(4) The opening and closing torque is large, the opening and closing is more laborious, and the opening and closing time is the principal.
(5) The fluid resistance is large, because the medium passage in the valve body is tortuous, the fluid resistance is large, and the power consumption is large.
(6) When the nominal flow pressure of the medium is PN≤16MPa, the downstream flow is generally adopted, and the medium flows upward from the valve flap. When the nominal pressure PN≥20MPa, the counterflow is generally used, and the medium flows downward from the valve flap. To increase the sealability. When in use, the shut-off valve medium can only flow in one direction and cannot change the flow direction.
(7) The valve flap is often eroded when fully open.
More valve information in one vertical valve:
Http://news.chinawj.com.cn
Submission:
Drum brush is divided into long hair, medium hair, short hair three kinds, its performance is the length of the drum brush hair, rather than the thickness and length of the drum itself, brush hair is usually divided into wool and chemical fiber two kinds.
Different rollers will brush different effects, long hair rollers will brush out some fine texture, concave and convex feeling, similar to the texture effect. The paint surface after short wool roller besmear is more uniform, smooth, without concave and convex feeling, in the wool is between the two.
Roller brush is mostly made of wool and foam plastic, which can be divided into paint drum brush, hair drawing drum brush, floor paint drum brush, flat coating drum brush, etc., mainly used for large-area paint rolling in architectural decoration engineering. And can be used for coating and rolling all kinds of paint, such as: latex paint, anti-rust paint, internal and external wall paint, wallpaper glue, etc.
Note:
The use of drum brush as long as the straight brush can be wiped, if you want to daub evenly, the drum is best in the paint bucket to be fully absorbed, and then take out a few rolling on the inclined plane, press out the excess paint and then begin to brush the wall.
Low price, good quality products, to create a perfect house decoration
Paint Roller,Foam Paint Roller,Paint Roller Brush,Roller Brush,dry paint roller quickly
Behappy Crafts (suzhou)Co.,Ltd , https://www.jshaoyue.com