South Korea's Pohang Steel said on Tuesday that the improvement in demand and the reduction in supply will support the increase in Korean stainless steel sales in August.
They believe that Korean stainless steel consumers will have some replenishment behavior after the end of the summer vacation in the case of production cuts. If the downstream starts to replenish the warehouse, the current weak demand for stainless steel will improve. A larger local stainless steel hot-rolled coil producer, Korean mill, sold 449,000 tons of stainless steel finished products in the second quarter, with sales up 2% from the same period last year but down 7% from the first quarter. At the same time, the company's stainless steel raw material output in the second quarter was 498,000 tons, and the output increased by 6% compared with the same period of last year, but decreased by 7% compared with the previous quarter.
But other market participants believe that the improvement in the stainless steel market should not be so early. They feel that the end-user purchases will not recover so quickly, and the demand recovery will wait until the end of the year. The retail price of 304 CRC (2mm) produced by the Korean factory on Tuesday was around 317-3.2 million won/ton, while the same material imported from China was about 300-3.1 million won/ton, which was basically the same as a week ago. Market trading is very light, and most consumers are reluctant to start purchasing before the end of the summer vacation.
At the same time, South Korea's Posco Steel expects nickel prices to remain weak in the third quarter, but because it is almost near the cost line, the possibility of further price declines is limited.
The company was established in 2002, constantly strive to keep making progress, the company constantly closes the most precise stainless steel belt, SUS301 imported stainless steel belt as the main business material, hardness is divided into: semi-hard 1/2H stainless steel belt, 3/4H stainless steel belt, FH Stainless steel belt, H stainless steel belt, EH stainless steel belt, SH stainless steel belt, maximum hardness 650HV, hardness of the entire steel strip is plus or minus 5 degrees. High hardness, but the bending angle of 180 degrees is constant, the shape is quite good, the elasticity is unchanged, and it is suitable for bending spring parts. The thickness of the steel strip is uniform, the tolerance is small, the minimum tolerance can reach plus or minus 0.001mm, and it can be used for high precision. Stainless steel gaskets and high-precision stampings, width precision up to plus or minus 0.01mm, high straightness precision, the smallest file bend can reach plus or minus 2mm within 10 meters, can be used for high-precision conveyor belt, the surface is delicate, no Chromatic aberration, scratched. Can be used for exterior decoration, soft stainless steel belts need to be customized. 304 soft stainless steel belt is not much in stock, 3/4H stainless steel belt, 1/2H stainless steel belt, all in stock (0.01mm-0.6mm), high elastic stainless steel belt, high hardness stainless steel belt, metal stamping parts, precision gasket, Stainless steel products, imported precision steel belt, elastic stainless steel belt, high elastic spring stainless steel belt, imported stainless steel coil, this material is widely used in machinery and equipment manufacturing, electronics, electrical appliances, computers, high-tech products, auto parts, kitchen supplies, Adjust gaskets, deep-drawn parts, spring stampings for metal stamping parts, stainless steel foil for overmolding and other industrial fields.
Thickness specification: 0.01mm-3.0mm
Width specification: 2.0mm - 1250mm
Hardness level: 145HV-650HV (1/4H, 1/2H, 3/4H, H, EH)
Surface state: 2B, BA, 8K, 6K, mirror products are of good quality, low price, complete stock, welcome new and old customers to inquire!
Some spot resources are as follows, the price is for reference only, based on the actual market conditions! The material is mainly SUS301/304/316.
0.01mm × 100mm The width of the electricity is variable, mainly based on spot specifications!
The width of the 0.02mm×100mm power is variable, mainly based on spot specifications!
0.03mm×300mm The width of the electricity is variable, mainly based on spot specifications!
0.05mm × 300mm The width of the electricity is variable, mainly based on spot specifications!
The 0.08mm×400mm power meter has a variable width and is mainly based on spot specifications!
The 0.10mm×600mm power meter has a variable width and is mainly based on spot specifications!
0.12mm × 600mm The width of the electricity is variable, mainly based on spot specifications!
0.15mm × 600mm The width of the electricity is variable, mainly based on spot specifications!
0.20mm × 600mm The width of the electricity is variable, mainly based on spot specifications!
0.25mm × 600mm The width of the electricity is variable, mainly based on spot specifications!
0.30mm × 600mm The width of the electricity is variable, mainly based on spot specifications!
0.40mm × 600mm The width of the electricity is variable, mainly based on spot specifications!
0.50mm × 600mm The width of the electricity is variable, mainly based on spot specifications!
0.60mm × 600mm The width of the electricity is variable, mainly based on spot specifications!
0.80mm × 600mm The width of the electricity is variable, mainly based on spot specifications!
1.00mm × 600mm The width of the electricity is variable, mainly based on spot specifications!
1.20mm×400mm The width of the electricity is variable, mainly based on spot specifications!
Good product quality, low price, complete stock, welcome new and old customers to inquire!
Selling a phone
Selling two phones
Manager Phone, Manager Huang
Manager phone, manager Li
Corporate website: http://
Http://
Rockwell hardness tester is the world's first designed based on the principle of rockwell hardness test, need only unilateral contact sample can test the hardness of the metal rockwell hardness tester, rockwell hardness tester measuring depend on magnetic head adsorption on the steel surface, don't need to support of sample, test precision up to the standard GB/T230, ISO6508, no less than desktop rockwell hardness tester. The Rockwell hardness test was first developed by Americans S.P. rockwell and H.M. Rockwell in 1914. In 1919 and 1921, they improved the design of rockwell hardness tester twice, which established the prototype of modern Rockwell hardness tester. In 1930, Wilson (C.H Wilson) updated the design, so that rockwell Hardness Testing methods and equipment more perfect. Our country has produced touch screen control and numerical display as well as curve display and automatic printing test data rockwell hardness tester. Rockwell hardness testing method is characterized by simple operation, rapid measurement, and can be read directly from dial indicator or optical projection screen or display screen. Along with Brinell and Vickers hardness testing, it has become one of the three most commonly used hardness testing methods
Rockwell Hardness Tester,Digital Rockwell Hardness Tester,Rockwell Hardness Test Scale,Rockwell C Hardness Tester
TROJAN (Suzhou) Technology Co., Ltd. , https://www.troolymaterial.com